Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.










Recent Projects
Pile FoundationConstruction Process







Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening

Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site

Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness

Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement

Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation

Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Foundation Drilling Contractor in India
Foundation drilling is an important part of deep foundation construction, particularly for projects that require structural support below existing ground level. It involves creating boreholes or drilled foundation elements according to the project's structural design, soil profile and required foundation depth. Accurate planning and suitable drilling techniques help establish a reliable base for buildings, industrial facilities, bridges and infrastructure developments. Jalmala Boring Works brings third-generation experience in foundation construction, with a company history dating back to 1962.
As a foundation drilling contractor, project requirements must be considered before selecting the appropriate drilling method. Important factors include soil composition, groundwater conditions, bore diameter, drilling depth, surrounding structures and site accessibility. Different ground conditions may require different equipment and construction procedures. A suitable approach helps maintain bore stability, manage excavation conditions and support the required foundation specifications.
Foundation drilling is commonly associated with bored cast-in-situ piles and other deep foundation systems. In these applications, drilling creates the required bore before reinforcement placement and concrete installation, as specified in the approved engineering design. Rotary drilling methods may be considered where project depth, soil conditions and equipment requirements make them appropriate. The selection of equipment and construction sequence should always follow the project's geotechnical investigation and structural requirements.
Jalmala Boring Works specializes in deep foundation-related construction, including pile foundations, diaphragm walls and ground anchors. These systems are used in different types of construction projects depending on structural loads, soil conditions, excavation requirements and site constraints. Foundation drilling can form an important part of pile foundation work, while diaphragm walls and ground anchors may be considered for projects involving deep excavation and earth-retention requirements.
Proper execution of foundation drilling requires attention to bore position, vertical alignment, specified depth and ground conditions throughout the construction process. Site supervision and coordination with engineering teams are important for maintaining consistency with approved drawings and technical specifications. Groundwater levels, loose soil layers and nearby structures should also be considered when planning drilling operations.
Foundation drilling is relevant to residential, commercial, industrial and infrastructure developments where conventional shallow foundations may not satisfy the project's structural or geotechnical requirements. Depending on the site investigation and engineering design, deep foundation systems can transfer structural loads to suitable soil or rock strata and help address challenging ground conditions.
With a legacy of experience since 1962, Jalmala Boring Works is a family-owned, third-generation company serving foundation construction requirements. The company's specialization in pile foundations, diaphragm walls and ground anchors supports projects that require dependable deep foundation and excavation-related construction solutions. Every project should be planned according to its specific site conditions, engineering design and execution requirements.
If you are looking for foundation drilling expertise in India, contact Jalmala Boring Works to discuss your project requirements. Share the site location, available geotechnical information, proposed foundation depth and structural requirements to help determine a suitable construction approach.
