
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Ground Anchor Installation in Gujarat, Ahmedabad and India
Ground anchor installation is an important part of geotechnical and deep foundation construction, particularly in projects requiring additional resistance against lateral ground pressure and structural movement. Jalmala Boring Works provides specialized foundation construction capabilities for infrastructure, commercial, industrial and residential developments. Established in 1962, the company is a third-generation family-owned business operating from Sarkhej, Ahmedabad, Gujarat. With more than 60 years of practical experience, it brings established foundation engineering knowledge, modern construction equipment and experienced site personnel to different project requirements. Its services include pile foundations, diaphragm walls and ground anchoring. For project developers seeking ground anchor installation in Gujarat, Jalmala Boring Works offers specialized deep foundation construction experience.
About Jalmala Boring Works
Jalmala Boring Works has built its reputation through three generations of involvement in foundation construction since 1962. The company works in the specialized deep foundation sector, supporting construction projects with different ground conditions and engineering requirements. Its operations combine practical industry experience with modern SANY hydraulic piling and diaphragm wall rigs. The company follows ISO 9001:2015 certified processes and emphasizes equipment readiness, quality assurance and organized project execution. Its pan-India capabilities cover active operations in more than 20 Indian states. This experience provides a foundation for coordinating specialized construction activities across different project locations. Know more about our foundation engineering experience.
Understanding the Ground Anchor Installation Process
Ground anchor installation involves placing an engineered anchoring element into suitable soil or rock so that structural forces can be transferred into the ground. An anchor system generally consists of a free length, a bonded length and an anchorage arrangement, depending on the selected design. The installation method varies according to geological conditions, anchor specifications, access restrictions and structural requirements. Ground investigation information is essential when determining the appropriate drilling and anchoring methodology. The engineering design also establishes the required anchor capacity, installation depth and testing criteria. Proper coordination between design, equipment and site execution is essential for reliable installation. Explore the ground anchor installation process.
Site Investigation and Installation Planning
Before anchor installation begins, the ground conditions and project requirements need to be evaluated. Geotechnical investigation information helps establish the soil and rock profile, groundwater conditions and expected ground behaviour. Structural drawings and anchor design documents provide information about the required anchor position, orientation, length and capacity. Site access, working platform conditions, nearby structures and construction sequencing are also relevant considerations. These factors help determine suitable drilling equipment and the installation methodology. Proper planning supports coordination between engineering teams, equipment operators and site personnel. Learn about ground investigation and installation planning.
Ground Anchor Drilling and Anchor Placement
Drilling is a major activity during ground anchor installation. The drilling arrangement must follow the approved anchor layout, inclination, depth and diameter specified by the engineering design. Equipment and drilling methods are selected according to the encountered ground conditions. After drilling, the anchoring element, which may consist of designed steel tendons or bars, is placed into the prepared borehole. Careful handling and correct positioning are important to maintain the intended anchoring arrangement. The construction team must coordinate drilling and placement activities with the project specifications and site safety requirements. Read about drilling and anchor placement considerations.
Ground Anchor Grouting, Stressing and Testing
Grouting is an important stage of many ground anchor installation systems. The grout establishes the required bond between the anchor and the surrounding ground within the designed bonded zone. Grouting procedures, material specifications and installation arrangements depend on the approved engineering methodology. Where required, anchors undergo stressing operations after the specified installation and curing stages. Stressing applies the designed tensile force to the anchoring element. Testing procedures, such as suitability or acceptance tests, are carried out according to project specifications and applicable engineering requirements. These stages help evaluate the performance of the installed anchoring system. Understand anchor grouting, stressing and testing.
Applications of Ground Anchor Installation
Ground anchors are used in different civil engineering applications where additional structural restraint is required. They may form part of retaining wall systems, deep basement excavations, underground construction, infrastructure developments and engineered slope stabilization arrangements. In urban construction, ground anchors can support excavation systems where surrounding soil and nearby structures require careful management. Infrastructure projects may also use anchoring arrangements in retaining structures and other geotechnical applications. The suitability of each system depends on engineering calculations, soil investigation results and project conditions. Explore ground anchor construction applications.
Ground Anchor Installation Contractor in Gujarat
Gujarat has extensive industrial, commercial and infrastructure development requirements. Construction activities involving deep excavation, retaining structures and underground facilities may require specialized geotechnical support. Jalmala Boring Works is based in Ahmedabad and provides foundation construction capabilities for projects throughout Gujarat. Its technical experience and equipment resources support coordination with developers, engineering consultants and construction contractors. Each ground anchor installation project is different, and the appropriate method must be established through engineering assessment and site investigation. For organizations searching for ground anchor installation contractors in Gujarat, Jalmala Boring Works brings decades of foundation construction experience.
Ground Anchor Installation in Ahmedabad
Ahmedabad is an important industrial and commercial centre with diverse construction requirements. Projects involving commercial basements, industrial facilities, retaining structures and infrastructure developments may require engineered ground anchoring arrangements. Located in Sarkhej, Ahmedabad, Jalmala Boring Works has a regional base for coordinating specialized foundation construction activities. Its experience in pile foundations, diaphragm walls and ground anchoring supports different deep foundation requirements. Project-specific engineering drawings, ground conditions and construction specifications guide the selection of the appropriate installation method. Discover ground anchoring capabilities in Ahmedabad.
Ground Anchor Installation Across India
India's infrastructure and construction industries involve a wide range of geotechnical and structural conditions. Ground anchoring can support engineered construction systems for transportation infrastructure, industrial developments, commercial buildings and underground structures. Jalmala Boring Works has pan-India execution capabilities, with active operations across more than 20 Indian states. Its long-standing experience, modern SANY hydraulic foundation equipment and established quality processes support construction coordination in different regions. The company's services cover pile foundation construction, diaphragm wall construction and ground anchoring. Learn about our foundation construction capabilities across India.
Quality Assurance and Construction Safety
Quality and safety are important throughout geotechnical construction. Jalmala Boring Works follows ISO 9001:2015 certified processes and emphasizes organized execution, equipment readiness and site coordination. The company operates modern SANY hydraulic piling and diaphragm wall rigs and highlights its advanced bentonite management practices and record of zero trench collapse incidents. Ground anchor installation also requires suitable drilling practices, controlled material handling and adherence to approved engineering procedures. Construction planning and site supervision are essential for managing the different activities involved in specialized foundation work. Read about our quality assurance and safety approach.
Contact Jalmala Boring Works
For enquiries about ground anchor installation, geotechnical anchoring, pile foundations and diaphragm wall construction, contact Jalmala Boring Works. The team can discuss project locations, site requirements and relevant technical information.
Company: Jalmala Boring Works
Contact Person: Mr. Amrulla Memon
Phone: +91 93745 45415
Email: jalmala.pile@gmail.com
Address: Dholka Road, Near Nariampura Village, Sarkhej-Okaf, Ahmedabad, Gujarat 382210, India.
Frequently Asked Questions About Ground Anchor Installation
What is ground anchor installation?
Ground anchor installation is a geotechnical construction process in which an anchoring element is installed into soil or rock to transfer tensile forces and provide structural support.
Where are ground anchors installed?
Ground anchors are used in retaining walls, basement excavations, deep excavation support systems, infrastructure structures and engineered slope stabilization applications.
What are the main stages of ground anchor installation?
Typical stages include site assessment, drilling, anchor placement, grouting, stressing and testing, according to the approved engineering design.
Does Jalmala Boring Works provide ground anchor services in Ahmedabad?
Jalmala Boring Works operates from Sarkhej, Ahmedabad, Gujarat, and provides deep foundation construction capabilities for projects in Ahmedabad and other parts of India.
How long has Jalmala Boring Works been in the foundation industry?
Jalmala Boring Works was established in 1962 and is a third-generation family-owned foundation construction company with more than 60 years of experience.
