Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.










Recent Projects
Pile FoundationConstruction Process







Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening

Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site

Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness

Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement

Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation

Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Pile Shaft Drilling Contractor in India
Pile shaft drilling is an essential operation in deep foundation construction where drilled shafts are created to support structural loads below ground level. These shafts form part of pile foundation systems used for buildings, bridges, industrial facilities and major infrastructure developments. The drilling process must be planned according to the required pile diameter, depth, soil profile, groundwater conditions and structural design. Jalmala Boring Works brings third-generation foundation construction experience dating back to 1962.
A pile shaft is formed by drilling into the ground to the specified depth and dimensions. Depending on the project design, the completed bore may receive reinforcement cages followed by concrete placement to create a bored cast-in-situ pile. Proper control of drilling alignment, bore depth and shaft stability is important for achieving the specified foundation requirements. Construction procedures should be selected based on geotechnical investigation and approved engineering drawings.
Different drilling methods may be considered depending on the ground conditions and project requirements. Rotary drilling equipment can be suitable for certain pile shaft applications, while other techniques may be required in hard strata, loose soil or groundwater-affected locations. Factors such as drilling diameter, required depth, site accessibility and nearby structures influence the selection of equipment and execution sequence.
Pile shaft drilling is commonly used where shallow foundations are unsuitable or where structural loads need to be transferred to deeper and more competent soil or rock layers. It is relevant to commercial buildings, residential developments, industrial plants, transportation infrastructure and other projects requiring engineered deep foundation systems. The final pile arrangement and construction specifications depend on the structural design and geotechnical investigation.
Jalmala Boring Works specializes in pile foundations, diaphragm walls and ground anchors. These foundation and excavation systems are selected according to the requirements of individual construction projects. Pile foundations provide deep structural support, while diaphragm walls and ground anchors may be used for retaining and excavation-support applications where specified by the project design.
Quality control during pile shaft drilling involves checking the bore location, verticality, diameter and achieved depth. Ground conditions should be monitored during drilling, with suitable procedures followed for maintaining shaft stability. Reinforcement installation and concrete placement must also follow the approved specifications to achieve the intended foundation performance.
With a company history dating back to 1962, Jalmala Boring Works is a family-owned, third-generation company with experience in deep foundation construction. Its specialization in pile foundations, diaphragm walls and ground anchors supports a range of construction requirements involving complex soil conditions, structural loads and excavation challenges.
If you are planning a project that requires pile shaft drilling or deep foundation construction in India, contact Jalmala Boring Works to discuss the project requirements. Providing details such as proposed pile depth, shaft diameter, site location and geotechnical information can help in understanding the appropriate construction approach.
