
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Anchor Pile Contractor — Across Ankleshwar
Mobilised from our Gujarat base, we serve all of Ankleshwar and the surrounding GIDC industrial belt.
Ankleshwar City
Base Service Area
Ankleshwar GIDC Estate
~5–15 min
Old Ankleshwar
~5–15 min
Station Road
~10–20 min
Bharuch Road
~10–20 min
Panoli GIDC
~15–25 min
Jhagadia GIDC
~20–30 min
Kosamba GIDC
~20–30 min
Valia
~25–35 min
Amod
~20–30 min
Hansot
~25–35 min
Zadeshwar
~20–30 min
Bharuch City
~25–35 min
Dahej PCPIR
~35–45 min
Vagra
~25–35 min
Ankleshwar Industrial Belt
Citywide
Need an anchor pile contractor in Ankleshwar? Call +91 93745 45415
Why Ankleshwar Clients Choose Jalmala
Eight advantages that make us the preferred anchor pile contractor for Ankleshwar projects.
Serving Ankleshwar from Gujarat Base
Mobilised from our Sarkhej, Ahmedabad head office — a Gujarat-based anchor pile contractor covering Ankleshwar GIDC and the wider industrial belt.
60+ Years of Gujarat Experience
Third-generation anchor pile contractor since 1962, with deep experience in chemical-industry ground conditions and high water tables across South Gujarat.
Owned Anchor Piling Plant
Company-owned anchor drilling rigs, grout pumps and stressing jacks mobilised to Ankleshwar — no rented equipment or third-party delays.
In-House Anchor Engineering
Engineers review anchor capacity, bond length, inclination and test loads before mobilisation on every Ankleshwar project.
In-House Anchor Testing
Proof load and pull-out testing performed by our own team on-site in Ankleshwar under the same ISO 9001:2015 system.
ISO 9001:2015 Certified Contractor
Documented anchor pile procedures, signed records and a complete handover dossier for every Ankleshwar contract.
Zero Anchor Pile Failure Record
Six decades of anchor pile contracting without an anchor failure on a completed contract.
4.9★ Client Rating
Consistently rated by clients across excavation support, slope stabilization and tie-back anchor projects in Gujarat.
Anchor Pile Projects We Handle in Ankleshwar
Anchor Pile Contractor in Ankleshwar – Gujarat-Based, Serving the Chemical Belt Since 1962
Ankleshwar is one of India's most concentrated chemical and pharma industrial hubs. The Ankleshwar GIDC estate hosts hundreds of plants, with a supporting industrial ecosystem in Panoli, Jhagadia and Kosamba GIDC. Each of these sites — along with the commercial and residential growth in Ankleshwar City, Old Ankleshwar and along Station Road and Bharuch Road — requires anchor pile work planned around its own ground conditions and load requirements. Jalmala Boring Works is an anchor pile contractor in Ankleshwar operating from our Sarkhej, Ahmedabad head office. We have been providing anchoring services across Gujarat since 1962.
Our owned anchor drilling rigs, grout pumps and stressing equipment mobilise from Ahmedabad to Ankleshwar for every project. When clients appoint us as their anchor pile contractor in Ankleshwar, they get a Gujarat-based specialist with owned plant, in-house engineering and in-house testing — with the same mobilisation standards we apply across the state.
Anchor Pile Work We Handle in Ankleshwar
Our anchor pile work in Ankleshwar covers chemical and pharma plant anchor piles in Ankleshwar GIDC, process equipment foundation anchors, Panoli GIDC and Jhagadia GIDC industrial anchor piles, Kosamba GIDC factory anchor piles, commercial complex excavation support on Station Road and Bharuch Road, residential high-rise basement tie-backs in Ankleshwar City, and bridge and flyover anchor piling on Ankleshwar Ring Road and the NH-48 corridor.
Why Local Ground-Condition Knowledge Matters in Ankleshwar
Ankleshwar's ground conditions are specific to the chemical belt. High water tables, alluvial soils near the Narmada belt, and the industrial-grade ground conditions inside the GIDC estates (particularly around older chemical plants where sub-surface conditions can vary) require careful anchor design. Anchor piling planned for a greenfield site doesn't automatically suit a brownfield expansion next to existing process equipment. As an experienced anchor pile contractor in Ankleshwar, our engineers have been reading South Gujarat's soil profile for decades. We plan anchor type, inclination, bond length and grouting accordingly.
Mobilisation to Ankleshwar
Our plant and crews mobilise from Ahmedabad to Ankleshwar for every project. Typical mobilisation is 2.5–3 hours, and we schedule it into the project programme. The equipment and crew always come from our own yard, not a third party. When clients appoint us as their anchor pile contractor in Ankleshwar, they avoid the coordination delays that come with mixed local and out-of-state crews.
Quality Assurance on Every Ankleshwar Anchor Pile Project
Every anchor pile we install in Ankleshwar follows our ISO 9001:2015 quality system. Drilling logs are signed, grout records are filed, stressing readings are recorded, and proof load and pull-out test reports are compiled into a single handover dossier for every anchor we install. For chemical and pharma plants where documentation discipline matters as much as technical performance, this documented approach is a major reason clients appoint us as their anchor pile contractor in Ankleshwar.
All Ankleshwar Areas Covered
We serve every part of Ankleshwar and the surrounding industrial belt — Ankleshwar City, Ankleshwar GIDC Estate, Old Ankleshwar, Station Road, Bharuch Road, Panoli GIDC, Jhagadia GIDC, Kosamba GIDC, Valia, Amod, Hansot, Zadeshwar, Bharuch City, Dahej PCPIR and Vagra. Wherever your project is in the district, our owned plant and in-house teams can reach it. If you are evaluating candidates for anchor pile contracting in Ankleshwar, our track record, equipment ownership and quality documentation give you a clear basis for comparison.
Frequently Asked Questions
Who is the best anchor pile contractor in Ankleshwar?
Jalmala Boring Works — a Gujarat-based, third-generation specialist since 1962 with owned anchor plant, in-house engineering, in-house testing, ISO 9001:2015 certification, a zero anchor pile failure record and a 4.9★ client rating.
Do you provide anchor pile work in Ankleshwar if your office is in Ahmedabad?
Yes. Ankleshwar and the wider GIDC industrial belt are core service areas. Our owned anchor drilling rigs, grout pumps and stressing equipment mobilise from Ahmedabad to Ankleshwar. Typical mobilisation is 2.5–3 hours.
What areas of Ankleshwar do you cover?
All of Ankleshwar — Ankleshwar City, Ankleshwar GIDC Estate, Old Ankleshwar, Station Road, Bharuch Road, Panoli GIDC, Jhagadia GIDC, Kosamba GIDC, Valia, Amod, Hansot, Zadeshwar, Bharuch City, Dahej PCPIR and Vagra.
What anchor pile projects do you handle in Ankleshwar?
Chemical and pharma plant anchor piles in Ankleshwar GIDC, process equipment foundation anchors, Panoli GIDC and Jhagadia GIDC industrial anchor piles, Kosamba GIDC factory anchor piles, commercial complex excavation support on Station Road and Bharuch Road, residential basement tie-backs, and bridge and flyover anchor piling on Ankleshwar Ring Road and the NH-48 corridor.
Do you know Ankleshwar chemical belt soil conditions?
Yes. 60+ years of experience with South Gujarat's alluvial soils, high water tables, and the chemical-industry ground conditions specific to Ankleshwar GIDC, Panoli, Jhagadia and Kosamba.
Is Jalmala Boring Works ISO certified?
Yes — ISO 9001:2015, with documented procedures, signed anchor records and complete handover dossiers for every Ankleshwar project.
What is your client rating?
Jalmala Boring Works holds a 4.9★ average client rating across verified anchor pile projects in Gujarat, including Ankleshwar.
Contact Us for Anchor Pile Contracting in Ankleshwar
Discuss your Ankleshwar anchor pile requirements with Mr. Amrulla Memon at +91 93745 45415 or email jalmala.pile@gmail.com. Our head office is at Dholka Road, near Nariampura Village, Narimanpura, Sarkhej-Okaf, Ahmedabad, Gujarat 382210. For an experienced Gujarat-based anchor pile contractor in Ankleshwar with 60+ years of contracting experience, ISO 9001:2015 certification and a 4.9★ rating, choose Jalmala Boring Works.
Get an Anchor Pile Contractor for Your Ankleshwar Project
Gujarat-based team with owned plant — mobilised to Ankleshwar.
