
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Anchor Pile Contractor — Across Gujarat
Contracting anchor pile projects statewide from our Ahmedabad head office, with owned plant and in-house engineering support.
Ahmedabad
Head Office
Sanand
~30–45 min
Changodar
~30–40 min
Gandhinagar
~45–60 min
Mehsana
~1.5–2 hrs
Vadodara
~2–2.5 hrs
Ankleshwar
~2.5–3 hrs
Dahej
~3–3.5 hrs
Bhavnagar
~3.5–4 hrs
Surat
~4–4.5 hrs
Rajkot
~4–4.5 hrs
Vapi
~4.5–5.5 hrs
Jamnagar
~5–5.5 hrs
Gandhidham
~5.5–6.5 hrs
Mundra / Kutch
~6–7.5 hrs
Pan-Gujarat Contractor
Statewide
Need an anchor pile contractor in Gujarat? Call +91 93745 45415
Why Appoint Jalmala as Your Anchor Pile Contractor
Eight contractor-selection reasons that reduce risk on your anchoring contract.
Anchor Pile Specialist Contractor
Ground anchoring and anchor piles are core disciplines at Jalmala — not a side service bolted onto general civil contracting.
60+ Years Contracting in Gujarat
Third-generation anchoring contractor operating since 1962, with continuous anchor pile contracts across Gujarat's ground conditions.
Owned Anchor Drilling Plant
Company-owned anchor drilling rigs, grout pumps and stressing jacks — no rented equipment, no third-party mobilisation delays.
In-House Anchor Engineering
Engineers review anchor capacity, bond length, inclination and test loads before mobilisation on every anchoring contract.
Own Testing Crew On-Site
Proof load and pull-out testing performed by our own team under the same ISO 9001:2015 system — no third-party testing gaps.
ISO 9001:2015 Contractor
Documented drilling, grouting and stressing procedures with signed records and a complete handover dossier on every contract.
Zero Anchoring-Failure Record
Six decades of anchor pile contracting without an anchor failure on a completed contract.
4.9★ Contractor Rating
Consistently rated by clients across excavation support, slope stabilization and tie-back anchor contracts in Gujarat.
Anchor Pile Contract Types We Undertake in Gujarat
Anchor Pile Contractor in Gujarat – A Third-Generation Specialist Since 1962
Choosing the right anchor pile contractor is one of the most consequential decisions on any excavation support, slope stabilization or structure anchoring project. The contractor controls drilling accuracy, grout quality, stressing control and testing integrity — the four factors that decide whether an anchor performs to its design capacity. Jalmala Boring Works has been a dedicated anchor pile contractor in Gujarat since 1962. We are a third-generation, family-owned specialist — not a general civil contractor who adds anchoring to a long list of services.
Our contracting model is built around ownership and accountability. We own our anchor drilling rigs, grout plants and stressing equipment, we run our own engineering department, and we perform our own proof load and pull-out testing. When a client appoints us as their anchor pile contractor in Gujarat, the entire chain — design review, drilling, grouting, stressing, testing and handover — sits inside one ISO 9001:2015 certified organisation.
Anchor Pile Contract Models We Offer
As an experienced anchor pile contractor, we work across multiple contract models: design-assist contracts where our engineers support the client's structural consultant on anchor capacity and bond length; supply-and-install contracts where the client provides design and we deliver the anchoring; item-rate anchor pile contracts measured by anchor count and depth; turnkey excavation support contracts covering drilling to final testing; and annual framework contracts for developers with recurring requirements. This flexibility is why clients across Gujarat return to us contract after contract.
Why Specialist Anchoring Contractors Outperform General Contractors
Anchor work is unforgiving of inexperience. A poorly drilled hole can reduce bond capacity below design; inadequate grouting can leave voids; incorrect stressing can overstress the tendon. A specialist anchor pile contractor controls these variables by owning the equipment, training the crews and verifying every anchor in-house. That is exactly how we have operated since 1962, and it is why we maintain a zero anchoring-failure record across six decades of contracting.
In-House Engineering as a Contract Advantage
Our engineering department is not a back-office function — it is a contract delivery tool. Before mobilisation, our engineers review the anchor capacity, plan the drilling inclination, specify the bond length and coordinate the testing programme with the client's structural consultant. On site, they monitor drilling accuracy, grout volumes and stressing pressures against the plan. This engineering-led approach is what distinguishes us as an anchor pile contractor in Gujarat from contractors who simply mobilise rigs and start drilling.
Quality Assurance on Every Anchoring Contract
Our ISO 9001:2015 certification is not a plaque on the wall — it governs how every contract is delivered. Drilling logs are signed, grout records are filed, stressing readings are recorded, and proof load and pull-out test reports are compiled into a single handover dossier for every anchor we install. When a client appoints us as their anchor pile contractor, they receive a documented anchoring system they can stand behind for decades — not a verbal assurance.
Statewide Anchoring Contract Coverage
From our Ahmedabad head office, we contract anchor pile work across the entire state — Ahmedabad, Sanand, Changodar, Gandhinagar, Mehsana, Vadodara, Ankleshwar, Dahej, Bhavnagar, Surat, Rajkot, Vapi, Jamnagar, Gandhidham and Mundra. Wherever your project is in Gujarat, our owned plant and in-house teams can mobilise. If you are evaluating candidates for anchor pile contracting in Gujarat, our track record, equipment ownership and quality documentation give you a clear basis for comparison.
Frequently Asked Questions
Who is the best anchor pile contractor in Gujarat?
Jalmala Boring Works — a third-generation specialist since 1962 with owned anchor drilling plant, in-house engineering, in-house testing, ISO 9001:2015 certification, a zero anchoring-failure record and a 4.9★ client rating.
What types of anchor pile contracts do you undertake?
Design-assist, supply-and-install, item-rate, turnkey excavation support, slope stabilization, diaphragm wall tie-back, bridge & tower foundation and annual framework anchor contracts.
Which areas of Gujarat do you serve as an anchor pile contractor?
The entire state — Ahmedabad, Sanand, Changodar, Gandhinagar, Mehsana, Vadodara, Ankleshwar, Dahej, Bhavnagar, Surat, Rajkot, Vapi, Jamnagar, Gandhidham and Mundra.
Why hire a specialist instead of a general contractor?
Specialists own the drilling rigs, engineer the anchor design and test every anchor in-house — reducing the risk of anchor failure, delays and excavation instability.
Is Jalmala Boring Works ISO certified?
Yes. We operate under an ISO 9001:2015 certified quality management system with signed anchor records and complete handover dossiers on every contract.
Can you provide a design-assist anchor pile contract?
Yes. Our engineering department reviews anchor capacity, bond length, inclination and test loads with the client's structural consultant before mobilisation begins.
What is your client rating as an anchor pile contractor?
Jalmala Boring Works holds a 4.9★ average client rating across verified anchor pile contracts in Gujarat.
Contact Us for Anchor Pile Contracting in Gujarat
Discuss your anchor pile contracting requirements with Mr. Amrulla Memon at +91 93745 45415 or email jalmala.pile@gmail.com. Our office is at Dholka Road, near Nariampura Village, Narimanpura, Sarkhej-Okaf, Ahmedabad, Gujarat 382210. For a specialist anchor pile contractor in Gujarat with 60+ years of contracting experience, ISO 9001:2015 certification and a 4.9★ rating, choose Jalmala Boring Works.
Appoint a Specialist Anchor Pile Contractor for Your Gujarat Project
Speak directly to our team — no middlemen, no delays.
