
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Specialist Foundation & Piling Contractors
Anchor Pile Contractor Near Me in Gujarat
Finding a reliable anchor pile contractor near your construction site is important for specialised foundation and ground-support work. Anchor pile operations may be required for retaining structures, basement construction, deep excavation and selected infrastructure projects. Choosing an experienced contractor with suitable equipment and technical knowledge helps coordinate drilling activities with the overall construction plan.
Jalmala Boring Works is a third-generation family-owned foundation company established in 1962. Based in Sarkhej-Okaf, Ahmedabad, Gujarat, the company undertakes specialised foundation-related operations, including piling, diaphragm wall construction and ground anchoring work.
With more than 60 years of industry experience and project experience across more than 20 Indian states, Jalmala Boring Works works with construction companies, developers, engineering consultants and infrastructure contractors. Project requirements are assessed according to the location, ground conditions, drawings and execution requirements.
If you are searching for an anchor pile drilling contractor in Gujarat or a foundation contractor near Ahmedabad, contact Jalmala Boring Works to discuss your project requirements.
Professional Anchor Pile Contractor for Construction Projects
Anchor pile and ground anchoring operations require proper coordination between project design, drilling equipment, site conditions and construction activities. The required drilling method and installation arrangement depend on whether the project involves a ground anchor, retaining wall support or another engineered foundation system.
An experienced contractor should understand the importance of drilling alignment, borehole dimensions, ground stability and execution quality. These factors can influence the performance and construction sequence of the complete foundation system.
Jalmala Boring Works discusses project specifications and site requirements before determining the appropriate equipment and execution approach for the proposed work.
Anchor Pile and Foundation Services
Different construction projects require different foundation and ground-support arrangements. Depending on the approved project design, the following types of specialist work may be relevant:
Anchor Pile Drilling
Specialised drilling operations for suitable anchor-related and foundation applications based on project drawings and ground conditions.
Ground Anchoring
Ground anchor installation arrangements for suitable retaining structures and excavation support systems.
Diaphragm Wall Construction
Specialised diaphragm wall foundation work for selected deep excavation and underground construction projects.
Retaining Wall Support
Foundation and anchoring-related work for engineered retaining structures where specified.
Basement Foundation Work
Foundation-related operations for suitable commercial, residential and industrial basement developments.
Specialised Piling Work
Piling and deep foundation operations selected according to site investigation and structural requirements.
How to Plan an Anchor Pile Project
Proper project planning helps contractors understand the work requirements and coordinate the drilling process with other construction activities. A typical project assessment includes the following steps:
1. Share Project Requirements
Provide the project location, drawings, required work details and construction schedule for an initial assessment.
2. Review Site and Ground Conditions
Review available geotechnical reports, soil strata, rock conditions, groundwater levels and site accessibility.
3. Understand Technical Specifications
Confirm the required bore diameter, drilling depth, inclination, quantity and applicable project specifications.
4. Plan Equipment and Execution
Determine suitable equipment and organise the work sequence according to the site and project requirements.
5. Carry Out the Drilling Work
Execute the approved drilling operations with attention to positioning, dimensions, safety and quality requirements.
6. Complete Project Documentation
Maintain relevant drilling records and inspection details according to the project's quality control requirements.
Projects That May Require Anchor Pile Contractors
Anchor-related foundation and drilling work may be required across several construction sectors. The actual system depends on engineering design and ground conditions.
Residential Buildings
Foundation and excavation support requirements for suitable residential developments.
Commercial Complexes
Specialised foundation work for commercial buildings and developments with underground floors.
Industrial Facilities
Foundation and ground-support requirements for industrial construction projects.
Deep Basement Projects
Drilling and anchoring operations for suitable multi-level basement excavation work.
Infrastructure Projects
Foundation-related operations for selected civil engineering and infrastructure developments.
Retaining Structures
Ground-support and anchoring arrangements for engineered retaining wall projects.
Anchor Pile Contractor Near Ahmedabad and Across Gujarat
Jalmala Boring Works is located in Sarkhej-Okaf, Ahmedabad, making it a point of contact for construction companies and developers looking for foundation-related services in Ahmedabad and nearby areas.
Project enquiries can be discussed for Ahmedabad, Gandhinagar, Surat, Vadodara, Rajkot, Bharuch, Vapi, Anand, Mehsana and other locations across Gujarat. Availability and mobilisation depend on project scope, site access and equipment requirements.
For projects outside Gujarat, the company also has experience in foundation-related work across more than 20 Indian states. Share your site location and project requirements to discuss feasibility.
Why Choose Jalmala Boring Works?
Selecting a foundation contractor involves considering experience, machinery, project coordination and the ability to understand site-specific technical requirements. Jalmala Boring Works has been involved in foundation engineering through three generations of family experience since 1962.
60+ Years of Experience
A third-generation family business established in 1962.
Modern SANY Equipment
Hydraulic piling and diaphragm wall equipment for specialised foundation operations.
ISO 9001:2015
Quality management practices supporting foundation project execution.
Pan-India Experience
Experience in foundation-related projects across more than 20 Indian states.
Specialised Foundation Work
Experience in piling, diaphragm wall construction and ground anchoring applications.
Project Coordination
Attention to site requirements, equipment planning and construction schedules.
Frequently Asked Questions
1. How can I find an anchor pile contractor near me in Gujarat?
You can contact Jalmala Boring Works in Sarkhej, Ahmedabad, to discuss anchor pile and foundation-related project requirements. Share your project location, drawings and technical specifications to check service feasibility.
2. Does Jalmala Boring Works provide anchor pile services in Ahmedabad?
Jalmala Boring Works is based in Sarkhej, Ahmedabad, and undertakes foundation-related projects in Ahmedabad and other locations, subject to project requirements and site feasibility.
3. What services should I discuss with an anchor pile contractor?
Depending on your project, you may need to discuss anchor drilling, ground anchoring, retaining wall support, basement excavation requirements and other specialised foundation operations.
4. Which factors affect anchor pile project costs?
Project costs depend on drilling depth, bore diameter, soil and rock conditions, equipment requirements, site accessibility, project quantity and the approved technical specifications. A project-specific quotation is required.
5. Can anchor pile work be undertaken for basement construction?
Anchor-related drilling and ground support may be required for suitable basement and deep excavation projects. The actual system must be selected according to structural design and geotechnical recommendations.
6. Does Jalmala Boring Works work outside Ahmedabad?
Jalmala Boring Works is based in Ahmedabad and has experience in foundation-related projects across more than 20 Indian states. Contact the team to discuss your location and project requirements.
Contact an Anchor Pile Contractor Near You
Planning an anchor pile, ground anchoring, basement or foundation project in Ahmedabad or Gujarat? Contact Jalmala Boring Works to discuss your project drawings, location, site conditions and technical requirements.
Contact Person: Mr. Amrulla Memon
Phone: +91 93745 45415
Email: jalmala.pile@gmail.com
Address: Dholka Road, Near Nariampura Village, Sarkhej-Okaf, Ahmedabad, Gujarat 382210, India
