
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Anchor Pile Contractor — Across Rajkot
Mobilised from our Gujarat base, we serve every corner of Rajkot district and the wider Saurashtra industrial belt.
Rajkot City
Base Service Area
Kalawad Road
~10–20 min
Raiya Road
~10–20 min
University Road
~10–20 min
150 Feet Ring Road
~10–20 min
Gondal Road
~15–25 min
Aji Dam Area
~15–25 min
Kotharia Road
~15–25 min
Nana Mava
~15–25 min
Mavdi
~15–25 min
Shapar-Veraval GIDC
~25–35 min
Metoda GIDC
~30–40 min
Gondal
~30–40 min
Morbi Road
~45–60 min
Jamnagar Road
~45–60 min
Rajkot District
Citywide
Need an anchor pile contractor in Rajkot? Call +91 93745 45415
Why Rajkot Clients Choose Jalmala
Eight advantages that make us the preferred anchor pile contractor for Rajkot projects.
Serving Rajkot from Gujarat Base
Mobilised from our Sarkhej, Ahmedabad head office — a Gujarat-based anchor pile contractor covering Rajkot citywide and the Saurashtra industrial belt.
60+ Years of Gujarat Experience
Third-generation anchor pile contractor since 1962, with deep experience in Saurashtra's soil, water tables and engineering-industry ground conditions.
Owned Anchor Piling Plant
Company-owned anchor drilling rigs, grout pumps and stressing jacks mobilised to Rajkot — no rented equipment or third-party delays.
In-House Anchor Engineering
Engineers review anchor capacity, bond length, inclination and test loads before mobilisation on every Rajkot project.
In-House Anchor Testing
Proof load and pull-out testing performed by our own team on-site in Rajkot under the same ISO 9001:2015 system.
ISO 9001:2015 Certified Contractor
Documented anchor pile procedures, signed records and a complete handover dossier for every Rajkot contract.
Zero Anchor Pile Failure Record
Six decades of anchor pile contracting without an anchor failure on a completed contract.
4.9★ Client Rating
Consistently rated by clients across excavation support, slope stabilization and tie-back anchor projects in Gujarat.
Anchor Pile Projects We Handle in Rajkot
Anchor Pile Contractor in Rajkot – Gujarat-Based, Serving Saurashtra's Engineering Capital Since 1962
Rajkot's construction and industrial footprint is unlike any other city in Gujarat. The engineering and auto component belt around Shapar-Veraval GIDC and Metoda GIDC, the growing high-rise residential footprint along Kalawad Road, Raiya Road and 150 Feet Ring Road, the castor and oil mill clusters near Gondal Road and Morbi Road, and the Aji Dam area's retaining and slope needs each require anchor pile work planned around their own ground conditions. Jalmala Boring Works is an anchor pile contractor in Rajkot operating from our Sarkhej, Ahmedabad head office. We have been providing anchoring services across Gujarat since 1962.
Our owned anchor drilling rigs, grout pumps and stressing equipment mobilise from Ahmedabad to Rajkot for every project. When clients appoint us as their anchor pile contractor in Rajkot, they get a Gujarat-based specialist with owned plant, in-house engineering and in-house testing — with the same mobilisation standards we apply across the state.
Anchor Pile Work We Handle in Rajkot
Our anchor pile work in Rajkot covers engineering and auto component plant anchor piles in Shapar-Veraval and Metoda GIDC, high-rise basement tie-back anchors on Kalawad Road and Raiya Road, commercial complex excavation support on University Road and 150 Feet Ring Road, residential society excavation support in Nana Mava and Mavdi, industrial shed anchor piles in Shapar-Veraval GIDC and Kotharia Road, Aji Dam area retaining wall and slope stabilization anchors, bridge and flyover anchor piling on Rajkot Ring Road, and castor and oil mill anchor piles on Gondal Road and Morbi Road.
Why Local Ground-Condition Knowledge Matters in Rajkot
Rajkot's ground conditions differ from central or south Gujarat — the district has harder formations in parts, water-table conditions around the Aji Dam area, and the industrial-grade ground at Shapar-Veraval and Metoda GIDC. Anchor piling planned for one part of Rajkot doesn't automatically suit another. As an experienced anchor pile contractor in Rajkot, our engineers have been reading Saurashtra's soil profile for decades. We plan anchor type, inclination, bond length and grouting accordingly.
Mobilisation to Rajkot
Our plant and crews mobilise from Ahmedabad to Rajkot for every project. Typical mobilisation is 4–4.5 hours, and we schedule it into the project programme. The equipment and crew always come from our own yard, not a third party. When clients appoint us as their anchor pile contractor in Rajkot, they avoid the coordination delays that come with mixed local and out-of-state crews.
Quality Assurance on Every Rajkot Anchor Pile Project
Every anchor pile we install in Rajkot follows our ISO 9001:2015 quality system. Drilling logs are signed, grout records are filed, stressing readings are recorded, and proof load and pull-out test reports are compiled into a single handover dossier for every anchor we install. When a client appoints us as their anchor pile contractor in Rajkot, they receive a documented anchoring system they can stand behind for decades.
All Rajkot Areas Covered
We serve every part of the Rajkot district — Kalawad Road, Raiya Road, University Road, 150 Feet Ring Road, Gondal Road, Aji Dam area, Kotharia Road, Nana Mava, Mavdi, Shapar-Veraval GIDC, Metoda GIDC, Gondal, Morbi Road and Jamnagar Road. Wherever your project is in the city, our owned plant and in-house teams can reach it. If you are evaluating candidates for anchor pile contracting in Rajkot, our track record, equipment ownership and quality documentation give you a clear basis for comparison.
Frequently Asked Questions
Who is the best anchor pile contractor in Rajkot?
Jalmala Boring Works — a Gujarat-based, third-generation specialist since 1962 with owned anchor plant, in-house engineering, in-house testing, ISO 9001:2015 certification, a zero anchor pile failure record and a 4.9★ client rating.
Do you provide anchor pile work in Rajkot if your office is in Ahmedabad?
Yes. Our owned anchor drilling rigs, grout pumps and stressing equipment mobilise from Ahmedabad to Rajkot for every project. Typical mobilisation is 4–4.5 hours.
What areas of Rajkot do you cover?
All of Rajkot — Kalawad Road, Raiya Road, University Road, 150 Feet Ring Road, Gondal Road, Aji Dam area, Kotharia Road, Nana Mava, Mavdi, Shapar-Veraval GIDC, Metoda GIDC, Gondal, Morbi Road and Jamnagar Road.
What anchor pile projects do you handle in Rajkot?
Engineering and auto component plant anchor piles in Shapar-Veraval and Metoda GIDC, high-rise basement tie-backs on Kalawad and Raiya Road, commercial complex excavation support on University Road and 150 Feet Ring Road, residential society support in Nana Mava and Mavdi, industrial shed anchor piles, Aji Dam area retaining wall anchors, bridge piling on Rajkot Ring Road, and castor/oil mill anchor piles on Gondal and Morbi Road.
Do you know Rajkot soil conditions?
Yes. 60+ years of experience with Saurashtra's soils, including the harder formations around Rajkot, water tables near the Aji Dam area, and the industrial-grade ground at Shapar-Veraval and Metoda GIDC.
Is Jalmala Boring Works ISO certified?
Yes — ISO 9001:2015, with documented procedures, signed anchor records and complete handover dossiers for every Rajkot project.
What is your client rating?
Jalmala Boring Works holds a 4.9★ average client rating across verified anchor pile projects in Gujarat, including Rajkot.
Contact Us for Anchor Pile Contracting in Rajkot
Discuss your Rajkot anchor pile requirements with Mr. Amrulla Memon at +91 93745 45415 or email jalmala.pile@gmail.com. Our head office is at Dholka Road, near Nariampura Village, Narimanpura, Sarkhej-Okaf, Ahmedabad, Gujarat 382210. For an experienced Gujarat-based anchor pile contractor in Rajkot with 60+ years of contracting experience, ISO 9001:2015 certification and a 4.9★ rating, choose Jalmala Boring Works.
Get an Anchor Pile Contractor for Your Rajkot Project
Gujarat-based team with owned plant — mobilised to Rajkot.
