
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Ground Anchoring Specialists Since 1962
Anchor Pile Drilling in India
Jalmala Boring Works provides professional anchor pile drilling in India for ground anchoring systems, diaphragm walls, retaining structures, deep basement construction and infrastructure projects. Established in 1962, Jalmala Boring Works is a family-owned, third-generation deep foundation contractor with more than 60 years of practical industry experience. Our ground anchoring capabilities support construction projects that require accurately drilled boreholes for engineered anchor systems.
Anchor drilling is an important stage in ground anchor installation. It involves creating boreholes at specified locations, depths and inclinations to accommodate steel tendons or anchor bars. The drilling method is selected according to ground conditions, geological investigation, borehole requirements and the approved engineering design. Jalmala Boring Works undertakes anchor drilling activities for commercial, residential, industrial and infrastructure construction.
Professional Ground Anchor Drilling Services
Ground anchors are used to transfer loads from retaining structures into suitable soil or rock strata. Accurate drilling is essential for achieving the specified anchor alignment, length and installation position. Depending on the project, drilling may be performed at an inclined angle behind diaphragm walls, retaining walls or other support structures.
Jalmala Boring Works undertakes drilling operations for permanent ground anchors, temporary anchors, prestressed tieback systems and rock anchors. Our services also include coordination with tendon installation, grouting, stressing and testing activities according to project requirements. For specialist drilling requirements, contact an experienced anchor pile drilling contractor in India.
Types of Anchor Drilling Applications
Ground Anchor Borehole Drilling
Boreholes are drilled to the required depth and inclination for installing ground anchor tendons. Drilling parameters are selected according to soil or rock conditions and the approved anchor design.
Tieback Anchor Drilling
Tieback anchor drilling is commonly undertaken behind retaining walls and diaphragm walls. Inclined boreholes accommodate anchor tendons that are later grouted and stressed as specified.
Diaphragm Wall Anchor Drilling
Anchor boreholes can be drilled as part of excavation support systems for diaphragm walls. The anchor arrangement depends on wall design, excavation stages and geotechnical conditions.
Rock Anchor Drilling
Rock anchor drilling is used where suitable rock formations provide the required anchorage zone. Drilling tools and methods are selected according to rock quality and borehole specifications.
Basement Excavation Anchor Drilling
Ground anchor boreholes may be installed for deep basement excavation support in commercial, residential and industrial developments, subject to design and site constraints.
Slope Stabilisation Drilling
Drilling for rock anchors and soil reinforcement systems may be undertaken for suitable slope stabilisation and excavation cut support applications.
Hydraulic Anchor Drilling Equipment
Hydraulic anchor drilling equipment is used to create boreholes with the required alignment, diameter and depth. Depending on the ground conditions, drilling may involve rotary or percussion techniques and suitable drilling accessories. Equipment selection also considers available working space, access conditions, drilling angle and construction sequence.
Jalmala Boring Works operates modern SANY hydraulic foundation equipment for its deep foundation activities. The selection of suitable equipment and drilling methods helps organise site operations for different soil and rock conditions. Every anchor pile drilling operation is planned around the technical requirements and approved drawings of the project.
Anchor Drilling Process and Execution
Anchor drilling requires proper setting out, equipment positioning, drilling control and coordination with subsequent installation activities. A typical sequence includes the following stages, although the exact method varies according to project specifications and ground conditions.
01. Site Survey and Setting Out
Anchor locations are marked according to approved drawings. Coordinates, drilling inclination, spacing, depth and working access are checked before equipment mobilisation.
02. Drilling Rig Positioning
Suitable anchor drilling equipment is positioned on a prepared working platform. Rig alignment and the drilling direction are checked against the specified anchor coordinates.
03. Anchor Borehole Drilling
The borehole is drilled to the specified diameter, inclination and depth. Rotary or percussion methods are selected according to the encountered soil or rock strata.
04. Borehole Cleaning
The drilled hole is cleaned using an appropriate flushing or cleaning procedure to remove loose drilling material and prepare the borehole for tendon installation.
05. Anchor Tendon Placement
Steel strands or threaded bars are prepared with the specified free length, bonded length, centralisers and corrosion protection before being inserted into the borehole.
06. Grouting and Follow-up Operations
Grout is injected according to the approved procedure. After the grout reaches the required strength, stressing, lock-off and testing are carried out where specified.
Anchor Drilling for Deep Excavation and Basement Projects
Deep excavation projects require suitable retaining and support systems to manage lateral earth pressure and construction-related loads. Ground anchor boreholes may be drilled behind diaphragm walls or retaining structures to accommodate tieback anchors. These systems are used in underground parking facilities, commercial buildings, residential towers, metro stations and industrial developments.
The drilling arrangement depends on excavation depth, soil profile, groundwater conditions, nearby structures and the approved structural design. Anchor inclination, spacing, free length, bond length and working loads must be established by the responsible engineers. Jalmala Boring Works coordinates drilling operations with associated diaphragm wall and deep foundation activities.
Anchor Drilling in Different Soil and Rock Conditions
Ground conditions influence the drilling method, equipment configuration and borehole construction procedure. Soil profiles may include soft clay, dense soil, gravel, weathered rock and mixed strata. Hard rock applications require suitable drilling tools and methods based on geological investigation.
Groundwater conditions and borehole stability must also be considered during drilling. Flushing, casing or other borehole support measures may be required depending on site conditions and the approved method statement. Our team considers these factors while planning anchor pile drilling in India for different construction applications.
Why Choose Jalmala Boring Works for Anchor Drilling?
Selecting an anchor drilling contractor involves evaluating technical experience, equipment, site execution planning, quality control and coordination capabilities. Jalmala Boring Works is a third-generation family-owned deep foundation company established in 1962. Our experience includes pile foundations, diaphragm walls and ground anchoring for construction and infrastructure projects.
- More than 60 years of deep foundation experience.
- Third-generation family-owned foundation specialist.
- Modern SANY hydraulic foundation equipment.
- ISO 9001:2015 certified quality management processes.
- Ground anchor drilling and related installation capabilities.
- Experience with diaphragm walls and excavation support.
- Permanent and temporary ground anchoring applications.
- Project execution capabilities across more than 20 Indian states.
Our team focuses on project-specific planning and coordination between drilling, tendon installation, grouting and stressing activities. Work procedures are selected according to approved drawings, geotechnical information and site requirements. For your construction project, contact an experienced anchor pile drilling contractor in India.
Anchor Pile Drilling in Gujarat and Across India
Based in Ahmedabad, Gujarat, Jalmala Boring Works undertakes deep foundation and ground anchoring projects in Gujarat and other parts of India. Regional project locations include Ahmedabad, Gandhinagar, Surat, Vadodara, Rajkot, Bharuch, Ankleshwar and Vapi, subject to project scope and operational requirements.
Our pan-India project capabilities support infrastructure, metro, industrial, commercial and residential construction. Whether the requirement involves anchor borehole drilling for a diaphragm wall, tieback anchors for basement excavation or rock anchors for a suitable geotechnical application, our team can review the project requirements. Jalmala Boring Works provides anchor pile drilling services across India with a focus on practical experience and coordinated execution.
Quality Control and Safety During Anchor Drilling
Quality checks during anchor drilling may include borehole location, inclination, diameter, depth, drilling records and borehole cleaning. Subsequent installation records may cover tendon details, grout information, stressing loads, elongation and testing results. The inspection requirements are determined by the project specifications and applicable engineering standards.
Safe drilling operations require suitable working platforms, equipment inspections, controlled access and coordination with other construction teams. Jalmala Boring Works follows quality-focused procedures and project-specific safety practices throughout its deep foundation activities.
Contact Jalmala Boring Works for Anchor Pile Drilling
If your project requires ground anchor drilling for a basement, diaphragm wall, retaining structure, metro development or industrial facility, contact Jalmala Boring Works. Share your project location, drawings, geotechnical information and expected construction requirements so our team can understand the scope.
With a foundation engineering legacy dating back to 1962, Jalmala Boring Works provides ground anchoring and deep foundation services supported by experienced teams and modern equipment. Contact us for your anchor pile drilling requirements across India.
Jalmala Boring Works · Since 1962
Discuss Your Anchor Drilling Project
Contact our team for ground anchor drilling, tieback systems, diaphragm wall support and deep excavation requirements.
Contact: Mr. Amrulla Memon
Phone: +91 93745 45415
Email: jalmala.pile@gmail.com
Location: Sarkhej, Ahmedabad, Gujarat 382210, India
Frequently Asked Questions
Anchor Pile Drilling FAQs
01What is anchor pile drilling?
Anchor pile drilling is the process of creating inclined or specified boreholes for installing ground anchors. These boreholes receive steel tendons or anchor bars that are subsequently grouted and, where required, stressed to provide support to retaining structures.
02Where is anchor drilling used?
Anchor drilling is commonly used for diaphragm wall support, retaining walls, deep basement excavation, underground metro projects, industrial foundations, slope stabilisation and other geotechnical applications.
03Which equipment is used for ground anchor drilling?
Ground anchor drilling generally uses suitable hydraulic anchor drilling rigs with rotary or percussion drilling systems. Equipment selection depends on borehole diameter, drilling depth, inclination, ground conditions and site access.
04Can anchor drilling be carried out in hard rock?
Anchor drilling can be carried out in suitable hard rock and mixed ground conditions using an appropriate drilling method and tooling. The method is selected according to geological investigation and project specifications.
05What happens after anchor hole drilling?
After drilling, the borehole is cleaned as required, the anchor tendon or bar is installed, and grouting is performed. Once the grout reaches the specified strength, the anchor may be stressed, locked off and tested according to the approved design.
06Does Jalmala Boring Works provide anchor drilling across India?
Jalmala Boring Works undertakes ground anchoring and deep foundation projects across India, supported by its experience in pile foundations, diaphragm walls and ground anchor systems.
07How can I contact Jalmala Boring Works for anchor drilling?
Contact Jalmala Boring Works at +91 93745 45415 or email jalmala.pile@gmail.com to discuss your anchor drilling and ground anchoring project requirements.
