
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Anchor Pile Installation — Across Gujarat
Our installation crews and owned drilling plant mobilise from Ahmedabad to every major city and industrial corridor in Gujarat.
Ahmedabad
HQ & Workshop
Sanand
~30–45 min
Changodar
~30–40 min
Gandhinagar
~45–60 min
Mehsana
~1.5–2 hrs
Vadodara
~2–2.5 hrs
Ankleshwar
~2.5–3 hrs
Dahej
~3–3.5 hrs
Bhavnagar
~3.5–4 hrs
Surat
~4–4.5 hrs
Rajkot
~4–4.5 hrs
Vapi
~4.5–5.5 hrs
Jamnagar
~5–5.5 hrs
Gandhidham
~5.5–6.5 hrs
Mundra / Kutch
~6–7.5 hrs
Pan-Gujarat Installation
Statewide
Need anchor pile installation in Gujarat? Call +91 93745 45415
Why Choose Jalmala for Anchor Pile Installation
Eight installation-specific advantages that de-risk your anchor programme.
End-to-End Installation Scope
Drilling, tendon insertion, grouting, curing, stressing and testing — the entire anchor pile installation is executed by one accountable team.
Owned Drilling & Grouting Plant
Company-owned anchor drilling rigs, grout pumps and stressing jacks mean faster mobilisation and tighter control over installation quality.
In-House Proof Load Testing
Every installed anchor is proof-tested and a sample is pull-out tested by our own team under the same ISO 9001:2015 system.
Engineered Installation Sequence
Anchor inclination, bond length, grouting pressure and stressing sequence are engineered in advance to protect adjacent structures.
Grout Mix & Pressure Control
Dedicated grout management with density, viscosity and pressure checks at every stage of anchor pile installation.
ISO 9001:2015 Installation Records
Signed drilling logs, grouting records, stressing readings and test reports handed over as a complete quality dossier.
Zero Installation Failure Record
Six decades of anchor pile installation without an anchor failure on a completed contract.
4.9★ Installation Rating
Consistently rated by clients across excavation support, slope stabilization and tie-back installation projects in Gujarat.
Where We Install Anchor Piles in Gujarat
Anchor Pile Installation in Gujarat – Executed In-House Since 1962
An anchor pile is only as good as its installation. Drilling accuracy, tendon centring, grout quality, curing time and stressing control all depend on how the anchor is physically installed on site. Jalmala Boring Works has been delivering professional anchor pile installation in Gujarat since 1962. As a third-generation, family-owned business, we execute the complete installation cycle with our own drilling rigs, grout plants and stressing jacks, our own engineering team and our own testing crew — no subcontracted equipment, no split accountability.
Whether the requirement is a tie-back anchor installation, a basement wall anchor installation, a diaphragm wall tie-back installation or a slope stabilization anchor installation, our anchor pile installation in Gujarat follows a disciplined, documented sequence from design review to final pull-out verification. This is what allows clients to trust the installed anchor as a permanent support element.
Step-by-Step Anchor Pile Installation Process
Our anchor pile installation is carried out in a controlled sequence: design review to confirm anchor capacity, inclination and bond length; drilling to the specified diameter and depth using owned anchor rigs; tendon insertion with centring; grouting with controlled mix and pressure; curing to achieve bond strength; stressing the anchor to the specified load; and proof load testing plus sample pull-out testing. Every step is logged and signed under our ISO 9001:2015 system, and the complete installation dossier is handed over to the client.
Why In-House Equipment Matters for Installation Quality
Installation quality depends heavily on the condition and calibration of the drilling and grouting equipment. Because we own our anchor rigs, grout pumps and stressing jacks, we control maintenance, availability and mobilisation directly. When clients appoint us for anchor pile installation in Gujarat, they avoid the delays and quality gaps that come with rented or subcontracted equipment. The same principle applies to testing: our in-house testing crew reports within the same quality system, so installation and verification stay inside one accountable team.
Installation Experience Across Gujarat's Ground Conditions
Gujarat presents a wide range of installation conditions — soft alluvial soils in the central belt, sandy strata with high water tables in the coastal belt, and harder formations in parts of Saurashtra and Kutch. Our engineers plan anchor type, drilling inclination, bond length and grouting accordingly. This ground-condition experience is a key reason clients repeatedly choose our anchor pile installation in Gujarat for sites where adjacent structures, high water tables or restricted access make installation sensitive.
Installation Safety and Documentation
Drilling accuracy, grouting pressure and stressing control are managed through strict procedures and continuous supervision. Our anchor pile installation teams work with a zero installation-failure record and a strong safety culture. Documentation is treated as part of the installation itself: drilling logs, grout records, stressing readings, and proof load and pull-out test reports are compiled into a single handover dossier for every anchor installed.
Gujarat-Wide Installation Coverage
Headquartered in Ahmedabad, our crews deliver anchor pile installation in Gujarat across Ahmedabad, Sanand, Changodar, Gandhinagar, Mehsana, Vadodara, Ankleshwar, Dahej, Bhavnagar, Surat, Rajkot, Vapi, Jamnagar, Gandhidham and Mundra. For projects that require a specialist installer with owned equipment, in-house testing and a 60+ year track record, Jalmala Boring Works is ready to mobilise anywhere in the state.
Frequently Asked Questions
What does anchor pile installation involve?
Design review, drilling, tendon insertion, grouting, curing, stressing, proof load testing and sample pull-out testing — executed as one controlled sequence.
Who is the best anchor pile installation contractor in Gujarat?
Jalmala Boring Works — 60+ years, owned drilling rigs and grout plants, in-house testing, ISO 9001:2015 records, zero installation-failure history and a 4.9★ client rating.
How are installed anchors verified?
Every anchor is proof load tested to the specified test load, and a sample is pull-out tested by our in-house crew. Signed records are included in the handover dossier.
Which areas of Gujarat do you cover?
The entire state — Ahmedabad, Sanand, Changodar, Gandhinagar, Mehsana, Vadodara, Ankleshwar, Dahej, Bhavnagar, Surat, Rajkot, Vapi, Jamnagar, Gandhidham and Mundra.
How long does installation take?
Duration depends on anchor count, depth, ground conditions and sequencing. A detailed installation programme is provided before mobilisation, and our track record includes completing installation ahead of schedule.
Is installation safe near existing structures?
Yes. Controlled drilling, engineered inclination and sequencing, and continuous supervision allow safe installation close to existing structures, backed by a zero installation-failure record.
Contact Us for Anchor Pile Installation in Gujarat
Discuss your anchor pile installation requirements with Mr. Amrulla Memon at +91 93745 45415 or email jalmala.pile@gmail.com. Our office is at Dholka Road, near Nariampura Village, Narimanpura, Sarkhej-Okaf, Ahmedabad, Gujarat 382210. For reliable anchor pile installation in Gujarat with owned equipment, in-house testing and 4.9★ client satisfaction, choose Jalmala Boring Works.
Get Anchor Pile Installation for Your Gujarat Project
Speak directly to our team — no middlemen, no delays.
