
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Anchor Pile Services — Across Gujarat
Our anchor pile crews and owned drilling rigs mobilise from Ahmedabad to every major city and industrial corridor in Gujarat.
Ahmedabad
Head Office
Sanand
~30–45 min
Changodar
~30–40 min
Gandhinagar
~45–60 min
Mehsana
~1.5–2 hrs
Vadodara
~2–2.5 hrs
Ankleshwar
~2.5–3 hrs
Dahej
~3–3.5 hrs
Bhavnagar
~3.5–4 hrs
Surat
~4–4.5 hrs
Rajkot
~4–4.5 hrs
Vapi
~4.5–5.5 hrs
Jamnagar
~5–5.5 hrs
Gandhidham
~5.5–6.5 hrs
Mundra / Kutch
~6–7.5 hrs
Pan-Gujarat Services
Statewide
Need anchor pile services in Gujarat? Call +91 93745 45415
Why Choose Jalmala for Anchor Pile Services
Eight service-specific advantages that de-risk your anchoring programme.
Specialist Anchor Pile Contractor
Anchor piles and ground anchoring are core services at Jalmala — not an add-on. Dedicated crews, dedicated equipment, dedicated engineering.
60+ Years of Anchoring Experience
Third-generation foundation specialist operating since 1962, with continuous anchor pile and ground anchoring experience across Gujarat.
Owned Drilling & Grouting Plant
Company-owned anchor drilling rigs, grout pumps and stressing equipment — full control over installation quality and schedule.
In-House Design Support
Engineers review anchor capacity, bond length, inclination and test loads before mobilisation on every anchoring contract.
Proof Load & Pull-Out Testing
Every anchor is proof-tested and a sample is pull-out tested, with signed test records included in the handover dossier.
ISO 9001:2015 Certified Processes
Documented drilling, grouting and stressing procedures with signed records for every anchor pile installed.
Zero Anchoring Failure Record
Six decades of anchor pile work without an anchor failure on a completed contract.
4.9★ Client Rating
Consistently rated by clients across excavation support, slope stabilization and tie-back anchoring projects in Gujarat.
Where We Provide Anchor Pile Services in Gujarat
Anchor Pile Services in Gujarat – Specialists Since 1962
Anchor piles are a critical element in deep excavation support, slope stabilization and structure anchoring — and their performance depends entirely on how well they are designed, drilled, grouted, stressed and tested. Jalmala Boring Works has been providing professional anchor pile services in Gujarat since 1962. As a third-generation, family-owned specialist, we execute the full anchoring cycle with our own drilling rigs, grout plants and stressing equipment, our own engineering team and our own testing crew.
Whether the requirement is a tie-back anchor for a basement wall, an anchor pile for slope stabilization, a diaphragm wall tie-back or a transmission tower foundation, our anchor pile services in Gujarat follow a disciplined, documented sequence from design review to final pull-out testing. Every anchor is proof-tested before handover.
What Our Anchor Pile Services Cover
Our anchor pile services include excavation support tie-backs, slope stabilization anchors, basement wall anchor piles, diaphragm wall tie-backs, secant and contiguous pile wall anchors, bridge abutment and wing wall anchors, transmission tower and mast anchors, and marine or waterfront structure anchoring. Each application requires a different anchor type, inclination and bond length — our engineers plan these in advance based on the ground conditions and the forces the anchor must resist.
Step-by-Step Anchor Pile Installation Process
Our anchor pile services follow a controlled sequence: design review to confirm anchor capacity, inclination and bond length; drilling to the specified diameter and depth using owned anchor rigs; anchor tendon insertion; grouting with controlled mix and pressure; curing to achieve bond strength; stressing the anchor to the specified load; and proof load testing plus sample pull-out testing. Every step is logged and signed under our ISO 9001:2015 system, and the complete test dossier is handed over to the client.
Why In-House Equipment Matters for Anchor Performance
Anchor performance is highly sensitive to drilling accuracy, grout quality and stressing control. Because we own our drilling rigs, grout pumps and stressing equipment, we control maintenance, calibration and availability directly. When clients appoint us for anchor pile services in Gujarat, they avoid the quality gaps that come with rented or third-party equipment. The same principle applies to testing — our in-house testing crew reports within the same quality system, so installation and verification stay inside one accountable team.
Anchor Pile Experience Across Gujarat's Ground Conditions
Gujarat presents a wide range of anchoring conditions — soft alluvial soils in the central belt, sandy strata with high water tables in the coastal belt, and harder formations in parts of Saurashtra and Kutch. Our engineers plan anchor type, inclination, bond length and grouting accordingly. This ground-condition experience is a key reason clients repeatedly choose our anchor pile services in Gujarat for sites where adjacent structures, high water tables or restricted access make anchoring sensitive.
Testing, Safety and Documentation
Every anchor we install is proof load tested to the specified test load, and a sample is pull-out tested to verify actual capacity. Stressing is monitored and recorded, with signed records included in the handover dossier. Our anchor pile services teams work with a zero anchoring-failure record and a strong safety culture, particularly on excavation support projects where anchor performance directly affects the safety of adjacent structures.
Gujarat-Wide Anchor Pile Coverage
Headquartered in Ahmedabad, our crews deliver anchor pile services in Gujarat across Ahmedabad, Sanand, Changodar, Gandhinagar, Mehsana, Vadodara, Ankleshwar, Dahej, Bhavnagar, Surat, Rajkot, Vapi, Jamnagar, Gandhidham and Mundra. For projects that require a specialist anchoring contractor with owned equipment, in-house testing and a 60+ year track record, Jalmala Boring Works is ready to mobilise anywhere in the state.
Frequently Asked Questions
What are anchor pile services?
Installing tensioned anchors into the ground to resist uplift, lateral pressure or sliding — used for excavation support, slope stabilization, basement tie-backs, diaphragm wall anchoring and tower foundations.
Who provides the best anchor pile services in Gujarat?
Jalmala Boring Works — 60+ years, owned drilling & grouting plant, in-house design support, proof load & pull-out testing, ISO 9001:2015 records, zero anchoring-failure history and a 4.9★ client rating.
Where are anchor piles used?
Excavation support tie-backs, slope stabilization, basement wall anchoring, diaphragm wall tie-backs, secant/contiguous pile wall anchors, bridge abutments, transmission towers and marine structures.
How are anchor piles tested?
Every anchor is proof load tested to the specified test load, and a sample is pull-out tested to verify capacity. Signed test records are included in the handover dossier.
Which areas of Gujarat do you cover?
The entire state — Ahmedabad, Sanand, Changodar, Gandhinagar, Mehsana, Vadodara, Ankleshwar, Dahej, Bhavnagar, Surat, Rajkot, Vapi, Jamnagar, Gandhidham and Mundra.
What equipment is used for anchor pile installation?
Company-owned anchor drilling rigs, grout pumps and stressing equipment — giving full control over drilling accuracy, grout quality and stressing.
Are anchor piles safe near existing structures?
Yes. When designed and installed correctly, anchor piles provide controlled lateral support for excavations close to existing structures. Every anchor is proof-tested before handover.
Contact Us for Anchor Pile Services in Gujarat
Discuss your anchoring requirements with Mr. Amrulla Memon at +91 93745 45415 or email jalmala.pile@gmail.com. Our office is at Dholka Road, near Nariampura Village, Narimanpura, Sarkhej-Okaf, Ahmedabad, Gujarat 382210. For reliable anchor pile services in Gujarat with owned equipment, in-house testing and 4.9★ client satisfaction, choose Jalmala Boring Works.
Get Anchor Pile Services for Your Gujarat Project
Speak directly to our team — no middlemen, no delays.
