
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Ground Anchoring Specialists Since 1962
Anchor Piles in India
Jalmala Boring Works provides professional anchor piles in India for deep excavation support, diaphragm walls, retaining structures, basement construction and infrastructure development. Established in 1962, Jalmala Boring Works is a family-owned, third-generation deep foundation specialist with more than 60 years of hands-on industry experience. Our ground anchoring services are designed around project requirements, site conditions and approved engineering specifications.
Anchor piles, also known as ground anchors or tieback anchors, are used to provide additional resistance to lateral forces acting on retaining structures. These systems transfer loads through steel tendons or anchor bars into suitable soil or rock strata. They are commonly considered for deep basement excavation, diaphragm wall construction, retaining walls, metro infrastructure and other projects where engineered ground support is required.
Ground Anchor Systems for Construction Projects
Ground anchoring is an important part of geotechnical and deep foundation construction. Depending on the application, anchors may be installed as permanent or temporary systems. The installation generally includes drilling an inclined borehole, placing a steel tendon or bar, grouting the anchorage zone, allowing the grout to achieve the required strength, and stressing the anchor where specified.
Jalmala Boring Works undertakes anchoring activities for commercial, residential, industrial and infrastructure projects. Our capabilities include anchor drilling, grouting, prestressed tieback systems, anchor stressing and testing as required by project specifications. For specialist ground anchoring requirements, connect with an experienced anchor piles contractor in India.
Types of Anchor Piles and Ground Anchors
Permanent Ground Anchors
Permanent ground anchors are designed for long-term structural support. They may be used for retaining walls, diaphragm walls and other structures where the approved design requires continued anchorage. Durability, corrosion protection and testing requirements are important considerations.
Temporary Ground Anchors
Temporary anchors provide support during specific construction stages, such as deep basement excavation and underground structure development. Their use and removal requirements depend on project sequencing and engineering specifications.
Prestressed Tieback Anchors
Prestressed tieback anchors use steel strands or threaded bars that are stressed to a specified load and secured through an anchor head assembly. They are commonly used to provide lateral support to retaining systems.
Rock Anchors
Rock anchors are installed into suitable rock formations to develop anchorage where geological conditions permit. Their design considers rock quality, borehole depth, bond length and specified load requirements.
Diaphragm Wall Anchors
Ground anchors may be installed behind diaphragm walls to provide lateral support during excavation. Anchor levels, spacing, inclination and loads are determined by the approved structural and geotechnical design.
Slope Anchoring and Soil Nailing
Ground reinforcement methods such as rock anchoring and soil nailing may be used for suitable slope stabilisation and excavation cut support applications, depending on site conditions and engineering recommendations.
Anchor Piles for Diaphragm Wall and Retaining Wall Support
Diaphragm walls are widely used in deep underground construction, including basements, metro stations and commercial developments. Ground anchors can be incorporated into the retaining system to resist lateral loads during staged excavation, where permitted by the engineering design. Correct anchor positioning, drilling inclination, tendon installation, grouting and stressing are essential parts of the construction process.
Retaining wall anchors are also used in selected industrial and infrastructure projects. Their design depends on soil parameters, groundwater conditions, excavation depth, surrounding structures and the required support loads. Jalmala Boring Works coordinates ground anchoring work with related foundation activities to support efficient construction execution. Our anchor piles in India support a range of deep excavation and retaining structure applications.
Ground Anchors for Deep Basement Construction
Deep basement projects require suitable excavation support systems to manage lateral earth pressure and construction loads. Ground anchors may be installed at multiple levels behind retaining walls or diaphragm walls, depending on the design. These systems are relevant to residential towers, commercial buildings, underground parking, industrial facilities and metro construction.
Anchor design and installation must account for the excavation sequence, available working space, ground conditions, groundwater and adjacent property constraints. Anchor lengths, bond zones, working loads and testing procedures are determined by the responsible project engineers. Jalmala Boring Works undertakes anchoring operations in coordination with site requirements and approved drawings.
Ground Anchor Installation Process
Ground anchor installation involves a series of coordinated activities. The actual method depends on the anchor type, geological conditions, design loads and project specifications. A typical installation sequence includes:
01. Survey and Setting Out
Anchor locations are marked according to approved drawings. The team checks drilling coordinates, inclination, spacing, depth and equipment access.
02. Anchor Hole Drilling
Inclined boreholes are drilled using suitable hydraulic anchor drilling equipment. Drilling alignment, diameter and depth are monitored according to the project requirements.
03. Tendon or Bar Installation
Steel strands or threaded bars are prepared with the specified free length, bonded length, centralisers and corrosion protection before being placed in the borehole.
04. Cement Grouting
Cement grout is injected using the approved procedure to develop the required bond between the anchor tendon and surrounding soil or rock.
05. Anchor Stressing and Lock-Off
After the grout reaches the specified strength, the anchor is stressed using hydraulic equipment and locked off at the approved load.
06. Testing and Quality Documentation
Required suitability, performance, proof or lift-off tests are conducted as specified. Installation and testing records are maintained for project review.
Why Choose Jalmala Boring Works for Anchor Piles?
Selecting a ground anchoring contractor requires consideration of practical experience, drilling equipment, quality procedures, site safety and project coordination. Jalmala Boring Works brings a third-generation family business legacy dating back to 1962 and experience in pile foundations, diaphragm walls and ground anchors.
- More than 60 years of deep foundation industry experience.
- Third-generation family-owned foundation specialist.
- Modern SANY hydraulic piling and diaphragm wall rigs.
- ISO 9001:2015 certified quality management processes.
- Permanent and temporary ground anchor systems.
- Anchor drilling, grouting, stressing and testing capabilities.
- Experience in diaphragm wall and deep excavation support.
- Project execution capabilities across more than 20 Indian states.
Our approach focuses on project-specific planning, coordination and quality-oriented execution. Anchor installation procedures are selected according to geotechnical investigation reports, structural drawings and site conditions. For your upcoming foundation project, contact Jalmala Boring Works for anchor piling solutions in India.
Anchor Piles in Gujarat and Across India
Based in Ahmedabad, Gujarat, Jalmala Boring Works undertakes deep foundation and ground anchoring projects across Gujarat and other parts of India. Regional project locations include Ahmedabad, Gandhinagar, Surat, Vadodara, Rajkot, Bharuch, Ankleshwar and Vapi, subject to project requirements and operational availability.
Our pan-India project capabilities support infrastructure, metro, commercial, residential and industrial construction. Whether the requirement involves diaphragm wall anchoring, basement tieback systems, retaining wall support or suitable rock anchors, our team can review the project scope and technical requirements. Jalmala Boring Works provides anchor piles in India with an emphasis on practical experience and coordinated site execution.
Quality Assurance and Safety in Ground Anchoring
Ground anchor performance depends on correct installation and verification. Quality checks may include borehole depth, drilling inclination, tendon details, grout information, stressing loads, elongation measurements and testing results. Inspection requirements are established according to project specifications and applicable engineering standards.
Safe anchor installation also requires suitable working platforms, equipment inspection, controlled access and coordination between drilling, grouting, stressing and excavation teams. Jalmala Boring Works follows quality management practices and project-specific safety procedures throughout its deep foundation operations.
Contact Jalmala Boring Works for Anchor Piles in India
If you are planning a basement, underground metro station, retaining wall, industrial facility or infrastructure development that requires ground anchors, contact Jalmala Boring Works. Share your project location, drawings, geotechnical information and construction requirements so our team can understand the scope of work.
With a foundation engineering legacy dating back to 1962, Jalmala Boring Works provides ground anchoring and deep foundation services supported by experienced teams and modern equipment. Connect with our team for your anchor piles project in India.
Jalmala Boring Works · Since 1962
Discuss Your Ground Anchoring Project
Contact our team for permanent and temporary ground anchors, tieback systems, diaphragm wall support and deep excavation requirements.
Contact: Mr. Amrulla Memon
Phone: +91 93745 45415
Email: jalmala.pile@gmail.com
Location: Sarkhej, Ahmedabad, Gujarat 382210, India
Frequently Asked Questions
Anchor Piles India FAQs
01What are anchor piles?
Anchor piles, commonly referred to as ground anchors or tieback anchors, are engineered anchoring systems used to transfer loads from retaining structures into suitable soil or rock. They are used in deep excavations, diaphragm walls, retaining walls and other geotechnical applications.
02What types of anchor piles are available?
Common ground anchoring systems include permanent ground anchors, temporary ground anchors, prestressed tieback anchors and rock anchors. The suitable type depends on the ground conditions, structural requirements and approved engineering design.
03Where are anchor piles used?
Anchor piles are used for diaphragm wall support, deep basement excavation, retaining walls, underground metro construction, industrial foundations, slope stabilisation and infrastructure projects.
04What is the purpose of tieback anchors?
Tieback anchors provide additional lateral support to retaining structures. They transfer forces through an anchored tendon into stable soil or rock and are commonly used in deep excavation and basement construction.
05Does Jalmala Boring Works provide ground anchoring across India?
Yes. Jalmala Boring Works undertakes ground anchoring and deep foundation projects across India, supported by its experience in pile foundations, diaphragm walls and anchor systems.
06How are ground anchors tested?
Ground anchors may undergo suitability, performance, proof or lift-off testing as required by the project specification. Hydraulic stressing equipment is used to verify load and elongation against the specified acceptance criteria.
07How can I contact Jalmala Boring Works?
Contact Jalmala Boring Works at +91 93745 45415 or email jalmala.pile@gmail.com to discuss your ground anchoring and foundation project requirements.
