
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Jalmala Piling Works | Odisha
Anchor Piles Services in Odisha
Jalmala Piling Works provides piling and ground engineering solutions for construction, industrial and infrastructure developments. Our Anchor Piles Services in Odisha page explains how ground anchoring systems can be considered for retaining walls, slope stabilization, excavation support and other projects requiring additional structural support.
Odisha has diverse geographical conditions, from coastal construction zones to industrial belts, river valleys and elevated terrain. Projects in Bhubaneswar, Cuttack, Rourkela, Sambalpur, Angul, Jharsuguda and other locations may require specialized foundation and ground support solutions. An experienced anchor piling contractor in Odisha can help assess suitable anchoring methods according to project drawings, geotechnical conditions and engineering requirements.
Anchor Piling Applications in Odisha
Anchor piles and ground anchors can be evaluated for retaining structures, deep excavations, hillside construction, bridge approaches, industrial foundations and infrastructure developments. Their purpose is to provide additional resistance against forces acting on a structure or soil mass.
In coastal and port-related developments around Paradip, Dhamra and Gopalpur, as well as industrial and infrastructure projects in Angul, Jajpur, Jharsuguda and Rourkela, the appropriate ground support system depends on soil conditions, groundwater levels, structural loads and project design. Our anchor piling services across Odisha can be discussed for suitable projects based on their technical requirements.
Major Cities and Locations Covered in Odisha
Potential project locations for anchor piling and ground engineering assessment include major cities, towns and developing areas throughout Odisha:
Industrial Areas and Infrastructure Locations in Odisha
Odisha has established industrial estates, manufacturing clusters, ports and industrial infrastructure across multiple districts. These locations can involve factory construction, retaining structures, excavation work and other civil engineering requirements.
Ground Anchoring Solutions for Odisha Projects
Selecting an appropriate anchoring system requires careful evaluation of ground conditions, rock quality, groundwater, excavation depth, slope geometry and structural loading. Depending on the project, ground anchors may be considered for slope stabilization, retaining wall support, excavation reinforcement and infrastructure construction.
Jalmala Piling Works can discuss ground anchoring solutions in Odisha according to project drawings, technical specifications and site investigation details. Every project requires an engineering assessment to determine the appropriate anchoring arrangement.
Frequently Asked Questions
1. What are anchor piles used for in construction projects?
Anchor piles and ground anchoring systems are used to provide additional ground support and resist tensile or lateral forces. They can be considered for retaining walls, excavation support, slope stabilization, bridges and infrastructure projects.
2. Where are anchor piling services available in Odisha?
Anchor piling can be evaluated for suitable projects in Bhubaneswar, Cuttack, Rourkela, Sambalpur, Angul, Jharsuguda, Paradip, Jajpur, Balasore, Berhampur and other locations across Odisha, subject to project requirements and site conditions.
3. Are anchor piles suitable for hilly areas in Odisha?
Ground anchoring systems may be suitable for selected hilly and sloping locations, including areas around Koraput, Rayagada, Kandhamal and other regions. A geotechnical investigation and engineering assessment are necessary to determine suitability.
4. Can anchor piles be used for retaining walls and excavation support?
Yes. Properly designed ground anchors can support suitable retaining wall systems and excavation support structures by resisting lateral earth pressure. Anchor type, depth, spacing and capacity depend on engineering calculations and site conditions.
5. What information is required for an anchor piling project quotation?
Useful project information includes the site location, structural drawings, soil investigation report, proposed excavation depth, anchor load requirements and project specifications. These details help assess the appropriate anchoring approach.
Discuss Your Anchor Piling Project in Odisha
Contact Jalmala Piling Works to discuss your construction requirements, project location and ground anchoring specifications for infrastructure, industrial and commercial developments in Odisha.
Contact Us