
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Anchor Piles Services in Punjab
Jalmala Piling Works provides anchor piles and ground anchoring solutions for infrastructure, industrial and construction projects in Punjab. Our Anchor Piles Services in Punjab are relevant for retaining walls, deep excavation support, basement construction, bridge approaches and slope stabilization projects. Anchor piling techniques help improve structural stability and resist lateral earth pressure when appropriately designed for site conditions.
Punjab has a diverse geographical landscape, including river plains, agricultural regions and areas near the Shivalik foothills. Infrastructure and industrial development projects may require specialized geotechnical investigation and suitable foundation engineering solutions. An experienced anchor piling contractor in Punjab can evaluate suitable anchoring systems according to soil characteristics, groundwater conditions, excavation depth and structural loading.
Our anchoring solutions can be considered for suitable projects in Ludhiana, Amritsar, Jalandhar, Patiala, Mohali, Bathinda, Pathankot, Hoshiarpur, Moga, Batala and other developing locations across Punjab. Applications include industrial developments, highway construction, retaining structures and excavation support. Our anchor piling services across Punjab are evaluated according to individual project requirements.
Jalmala Piling Works focuses on project-specific foundation requirements and appropriate geotechnical construction methodologies. Every anchoring solution should be evaluated based on site investigation, soil and rock characteristics, structural requirements and engineering design. Contact us to discuss suitable ground anchoring solutions in Punjab for your construction project.
Anchor Piling Applications in Punjab
Anchor piles and ground anchoring systems can be considered for several construction and geotechnical engineering applications:
- Deep excavation support systems
- Retaining wall stabilization
- Highway and road construction
- Bridge and infrastructure construction
- Basement construction support
- Earth retention systems
- Ground reinforcement applications
- Industrial foundation projects
- Slope stabilization projects
Cities Covered for Anchor Piles Services in Punjab
We cater to suitable anchor piling and foundation-related project requirements across major cities, towns and developing locations throughout Punjab.
- Anchor Piles Services in Ludhiana
- Anchor Piles Services in Amritsar
- Anchor Piles Services in Jalandhar
- Anchor Piles Services in Patiala
- Anchor Piles Services in Mohali
- Anchor Piles Services in Bathinda
- Anchor Piles Services in Pathankot
- Anchor Piles Services in Hoshiarpur
- Anchor Piles Services in Moga
- Anchor Piles Services in Batala
- Anchor Piles Services in Kapurthala
- Anchor Piles Services in Phagwara
- Anchor Piles Services in Firozpur
- Anchor Piles Services in Faridkot
- Anchor Piles Services in Sangrur
- Anchor Piles Services in Barnala
- Anchor Piles Services in Malerkotla
- Anchor Piles Services in Mandi Gobindgarh
- Anchor Piles Services in Rajpura
- Anchor Piles Services in Khanna
- Anchor Piles Services in Abohar
- Anchor Piles Services in Gurdaspur
- Anchor Piles Services in Tarn Taran
- Anchor Piles Services in Fazilka
- Anchor Piles Services in Muktsar
- Anchor Piles Services in Mansa
- Anchor Piles Services in Nabha
- Anchor Piles Services in Anandpur Sahib
- Anchor Piles Services in Rupnagar
- Anchor Piles Services in Sunam
Industrial Areas Covered in Punjab
Punjab has several important manufacturing, engineering and industrial centres. These locations may require specialized foundation engineering, retaining structures and ground support solutions. Potential project locations include:
- Focal Point Industrial Area, Ludhiana
- Industrial Area, Jalandhar
- Industrial Area, Amritsar
- Industrial Focal Point, Mohali
- Mandi Gobindgarh Steel Industrial Hub
- Batala Engineering and Industrial Cluster
- Rajpura Industrial Area
- Dera Bassi Industrial Area
- Phagwara Industrial Area
- Pathankot Industrial Area
- Bathinda Industrial Area
- Fatehgarh Sahib Industrial Area
- Ludhiana Industrial Cluster
- Jalandhar Sports Goods Industrial Cluster
Frequently Asked Questions About Anchor Piles
What are anchor piles used for in construction?
Anchor piles and ground anchoring systems are used in geotechnical engineering to support retaining walls, resist lateral earth pressure, stabilize slopes and provide additional support for deep excavation projects.
Where are anchor piling services available in Punjab?
Anchor piling requirements can be evaluated across Punjab, including Ludhiana, Amritsar, Jalandhar, Patiala, Mohali, Bathinda, Pathankot, Hoshiarpur and other project locations, depending on site conditions.
Are anchor piles suitable for highway and bridge construction?
Anchor piles and ground anchoring systems may be suitable for selected highway, bridge approach, retaining wall and excavation support projects, depending on geotechnical investigation and structural design.
Can anchor piles support deep basement excavation?
Properly designed ground anchors and anchoring systems can support retaining structures used in deep basement excavation by helping resist lateral earth pressure.
What factors determine anchor piling requirements?
Anchor piling requirements depend on soil and rock conditions, groundwater levels, excavation depth, structural loading, anchor capacity and project-specific geotechnical engineering specifications.
