
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Anchor Piling Contractor — Across Gujarat
Delivering anchor piling statewide from our Ahmedabad head office, with owned piling rigs and in-house engineering support.
Ahmedabad
Head Office
Sanand
~30–45 min
Changodar
~30–40 min
Gandhinagar
~45–60 min
Mehsana
~1.5–2 hrs
Vadodara
~2–2.5 hrs
Ankleshwar
~2.5–3 hrs
Dahej
~3–3.5 hrs
Bhavnagar
~3.5–4 hrs
Surat
~4–4.5 hrs
Rajkot
~4–4.5 hrs
Vapi
~4.5–5.5 hrs
Jamnagar
~5–5.5 hrs
Gandhidham
~5.5–6.5 hrs
Mundra / Kutch
~6–7.5 hrs
Pan-Gujarat Anchor Piling
Statewide
Need an anchor piling contractor in Gujarat? Call +91 93745 45415
Why Choose Jalmala for Anchor Piling
Eight piling-specific advantages that de-risk your anchor piling programme.
Specialist Anchor Piling Contractor
Anchor piling is a core discipline at Jalmala — dedicated piling rigs, dedicated crews and dedicated engineering, not a side offering.
60+ Years of Anchor Piling
Third-generation anchor piling contractor operating since 1962, with continuous anchoring work across Gujarat's varied ground conditions.
Owned Piling & Grouting Plant
Company-owned anchor piling rigs, grout pumps and stressing jacks — no rented equipment, no third-party mobilisation delays.
In-House Piling Engineering
Engineers review anchor type, drilling inclination, bond length and test loads before mobilisation on every piling contract.
In-House Piling Test Crew
Proof load and pull-out testing performed by our own team under the same ISO 9001:2015 system — no testing gaps.
ISO 9001:2015 Piling Processes
Documented anchor piling procedures, signed records and a complete handover dossier on every piling contract.
Zero Anchor Piling Failure
Six decades of anchor piling contracting without an anchor failure on a completed contract.
4.9★ Piling Contractor Rating
Consistently rated by clients across excavation support, slope stabilization and tie-back anchor piling projects in Gujarat.
Anchor Piling Work We Deliver in Gujarat
Anchor Piling Contractor in Gujarat – Specialists Since 1962
Anchor piling is a specialised discipline that demands the right rigs, trained crews, precise drilling and strict stressing control. Jalmala Boring Works has been a dedicated anchor piling contractor in Gujarat since 1962. As a third-generation, family-owned business, we execute the full anchor piling cycle with our own piling rigs, grout plants and stressing equipment, our own engineering team and our own testing crew.
Whether the requirement is a tie-back anchor piling for a basement wall, an anchor piling for slope stabilization, a diaphragm wall tie-back or a transmission tower foundation, our anchor piling work in Gujarat follows a disciplined, documented sequence from design review to final pull-out testing. Every anchor is proof-tested before handover.
What Anchor Piling Work We Cover
Our anchor piling work includes tie-back anchor piling for excavations, basement wall anchor piling, diaphragm wall tie-back piling, secant and contiguous pile wall piling, slope stabilization anchor piling, bridge abutment anchor piling, transmission tower anchor piling, and marine or waterfront anchor piling. Each application requires a different anchor type, inclination and bond length — our engineers plan these in advance based on the ground conditions and the forces the anchor must resist.
Step-by-Step Anchor Piling Process
Our anchor piling work follows a controlled sequence: design review to confirm anchor capacity, inclination and bond length; drilling to the specified diameter and depth using owned anchor piling rigs; anchor tendon insertion; grouting with controlled mix and pressure; curing to achieve bond strength; stressing the anchor to the specified load; and proof load testing plus sample pull-out testing. Every step is logged and signed under our ISO 9001:2015 system, and the complete test dossier is handed over to the client.
Why In-House Piling Rigs Matter for Anchor Performance
Anchor piling performance is highly sensitive to drilling accuracy, grout quality and stressing control. Because we own our anchor piling rigs, grout pumps and stressing equipment, we control maintenance, calibration and availability directly. When clients appoint us for anchor piling work in Gujarat, they avoid the quality gaps that come with rented or third-party equipment. The same principle applies to testing — our in-house testing crew reports within the same quality system, so anchor piling and verification stay inside one accountable team.
Anchor Piling Experience Across Gujarat's Ground Conditions
Gujarat presents a wide range of anchor piling conditions — soft alluvial soils in the central belt, sandy strata with high water tables in the coastal belt, and harder formations in parts of Saurashtra and Kutch. Our engineers plan anchor type, inclination, bond length and grouting accordingly. This ground-condition experience is a key reason clients repeatedly choose our anchor piling work in Gujarat for sites where adjacent structures, high water tables or restricted access make anchor piling sensitive.
Testing, Safety and Documentation
Every anchor piling we install is proof load tested to the specified test load, and a sample is pull-out tested to verify actual capacity. Stressing is monitored and recorded, with signed records included in the handover dossier. Our anchor piling work teams work with a zero anchor piling failure record and a strong safety culture, particularly on excavation support projects where anchor performance directly affects the safety of adjacent structures.
Gujarat-Wide Anchor Piling Coverage
Headquartered in Ahmedabad, our crews deliver anchor piling work in Gujarat across Ahmedabad, Sanand, Changodar, Gandhinagar, Mehsana, Vadodara, Ankleshwar, Dahej, Bhavnagar, Surat, Rajkot, Vapi, Jamnagar, Gandhidham and Mundra. For projects that require a specialist anchor piling contractor with owned rigs, in-house testing and a 60+ year track record, Jalmala Boring Works is ready to mobilise anywhere in the state.
Frequently Asked Questions
Who is the best anchor piling contractor in Gujarat?
Jalmala Boring Works — a third-generation specialist since 1962 with owned anchor piling rigs, in-house engineering, in-house testing, ISO 9001:2015 certification, a zero anchor piling failure record and a 4.9★ client rating.
What is anchor piling?
Anchor piling is the process of installing tensioned anchors into the ground using piling rigs to resist uplift, lateral pressure or sliding forces — used for excavation support, slope stabilization, basement tie-backs, diaphragm wall anchoring and tower foundations.
Which areas of Gujarat do you cover for anchor piling?
The entire state — Ahmedabad, Sanand, Changodar, Gandhinagar, Mehsana, Vadodara, Ankleshwar, Dahej, Bhavnagar, Surat, Rajkot, Vapi, Jamnagar, Gandhidham and Mundra.
How are anchor pilings tested?
Every anchor piling is proof load tested to the specified test load, and a sample is pull-out tested to verify capacity. Signed test records are included in the handover dossier.
What equipment is used for anchor piling?
Company-owned anchor piling rigs, grout pumps and stressing jacks — giving full control over drilling accuracy, grout quality and stressing.
Is anchor piling safe near existing structures?
Yes. When designed and installed correctly, anchor piling provides controlled lateral support for excavations close to existing structures. Every anchor is proof-tested before handover.
What is your client rating as an anchor piling contractor?
Jalmala Boring Works holds a 4.9★ average client rating across verified anchor piling projects in Gujarat.
Contact Us for Anchor Piling in Gujarat
Discuss your anchor piling requirements with Mr. Amrulla Memon at +91 93745 45415 or email jalmala.pile@gmail.com. Our office is at Dholka Road, near Nariampura Village, Narimanpura, Sarkhej-Okaf, Ahmedabad, Gujarat 382210. For specialist anchor piling work in Gujarat with owned rigs, in-house testing and 4.9★ client satisfaction, choose Jalmala Boring Works.
Get an Anchor Piling Contractor for Your Gujarat Project
Speak directly to our team — no middlemen, no delays.
