
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Ground Anchoring Specialists Since 1962
Anchor Piling Contractor in India
Jalmala Boring Works is an experienced anchor piling contractor in India specialising in ground anchoring systems for deep excavation support, diaphragm walls, retaining structures, basements and infrastructure construction. Established in 1962, the company is a family-owned, third-generation deep foundation specialist with more than six decades of practical industry experience. Our ground anchoring capabilities support construction requirements where retaining structures need additional resistance against lateral earth and structural loads.
Ground anchors are important components in modern geotechnical and foundation engineering. They are designed to transfer forces from retaining structures into suitable soil or rock strata through an engineered anchoring system. Depending on the site conditions and approved design, anchor systems may include steel tendons or bars, drilled boreholes, grouting, stressing equipment and anchor head assemblies. As an established anchor piling contractor in India, Jalmala Boring Works focuses on systematic execution, equipment capability and site-specific construction planning.
Professional Ground Anchor Installation Services
Ground anchor installation requires careful coordination between drilling operations, tendon placement, grouting, stressing and testing. The anchoring arrangement is selected according to soil or rock conditions, excavation depth, retaining wall design, groundwater conditions and project specifications. Jalmala Boring Works undertakes ground anchoring work for commercial, residential, industrial and infrastructure developments where controlled excavation support is required.
Our services include permanent ground anchors for long-term structural support and temporary ground anchors for construction-stage excavation requirements. We also undertake prestressed tieback anchoring, rock anchoring and related grouting operations as specified by the project design. Each installation is planned around approved drawings, specified anchor loads, required bond lengths and site execution conditions. For project requirements, consult an experienced anchor piling contractor in India.
Types of Anchor Piling and Ground Anchoring Solutions
Permanent Ground Anchors
Permanent anchors are designed for long-term structural applications. They can provide additional support to retaining walls and other structures when included in the approved engineering design. Corrosion protection and durability requirements are important considerations.
Temporary Ground Anchors
Temporary anchors are commonly used during construction activities such as basement excavation and underground structure development. They provide temporary lateral support to retaining systems while construction progresses.
Prestressed Tieback Anchors
Prestressed tieback systems use steel tendons or bars that are stressed to a specified load and locked off through an anchor head assembly. These systems can help resist lateral forces acting on retaining structures.
Rock Anchors
Rock anchors are used where suitable rock strata provide the required anchorage zone. Their design and installation depend on rock quality, borehole conditions, bond length and specified load requirements.
Diaphragm Wall Anchoring
Ground anchors can be used with diaphragm walls to provide lateral support during deep excavation. The number of anchor levels, inclination and working loads depend on the structural and geotechnical design.
Slope Stabilisation and Soil Nailing
Ground reinforcement techniques such as soil nailing and rock anchoring may be used for suitable slope and cut stabilisation applications, subject to site investigation and engineering recommendations.
Anchor Piling for Deep Excavation and Basement Construction
Deep basement construction in developed urban areas often requires engineered excavation support. Ground anchors may be installed behind diaphragm walls or other retaining systems to resist lateral loads during excavation. These arrangements are used in commercial buildings, residential towers, underground parking facilities, metro stations and industrial developments. Anchor locations, inclination, length and stressing loads must follow the approved geotechnical and structural design.
Jalmala Boring Works provides ground anchoring support for projects where excavation stability and retaining wall performance are important. Our experience in diaphragm wall construction and deep foundation activities helps us coordinate anchoring operations with associated site work. Clients looking for an experienced anchor piling contractor in India can discuss their drawings, ground investigation reports and project execution requirements with our team.
Ground Anchor Installation Process
A typical ground anchor installation sequence includes multiple stages. The exact method and inspection requirements are determined by project specifications, ground conditions and the approved engineering design.
- Site survey and setting out: Anchor positions, inclination, spacing and drilling coordinates are marked according to approved drawings.
- Anchor hole drilling: Boreholes are drilled to the specified alignment, diameter and depth using suitable drilling equipment.
- Tendon installation: Steel strands or anchor bars are assembled with the required centralisers and corrosion protection before being placed in the borehole.
- Grouting operation: Cement grout is introduced as specified to develop the required bond between the anchor tendon and surrounding ground.
- Stressing and lock-off: After the grout achieves the specified strength, anchors are stressed and locked off to the approved design load.
- Testing and documentation: Required proof, performance or suitability tests are conducted and results are recorded according to project requirements.
Why Choose Jalmala Boring Works for Anchor Piling in India?
Selecting a suitable anchor piling contractor involves evaluating technical experience, equipment, execution planning, quality procedures and coordination with other foundation activities. Jalmala Boring Works brings a third-generation family business background and more than 60 years of experience in deep foundation engineering.
- Deep foundation experience dating back to 1962.
- Third-generation family-owned foundation engineering business.
- Modern SANY hydraulic piling and diaphragm wall equipment.
- ISO 9001:2015 certified quality management processes.
- Ground anchoring capabilities for permanent and temporary applications.
- Experience supporting basement, metro, industrial and infrastructure construction.
- Project execution capabilities across more than 20 Indian states.
- Coordination with pile foundation and diaphragm wall activities.
Our approach combines practical site experience with construction planning and quality monitoring. Every project is different, so anchor installation methods are selected according to the project drawings, ground investigation, access conditions and technical requirements. As an established anchor piling contractor in India, we aim to deliver organised site execution and dependable ground anchoring support.
Anchor Piling Contractor in Gujarat and Across India
Based in Ahmedabad, Gujarat, Jalmala Boring Works undertakes deep foundation and ground anchoring projects in Gujarat and other parts of India. Our regional project coverage includes Ahmedabad, Gandhinagar, Surat, Vadodara, Rajkot, Bharuch, Ankleshwar and Vapi, subject to project scope and operational requirements. We also support infrastructure and construction developments in other Indian states.
Whether a project requires tieback anchors for a basement, retaining wall anchoring for an excavation, or rock anchors for a suitable geotechnical application, the work begins with understanding the approved design and site conditions. Developers, EPC contractors, civil contractors and infrastructure organisations can contact our team to discuss technical requirements with an experienced anchor piling contractor in India.
Engineering Coordination, Quality and Site Safety
Ground anchoring is a specialist geotechnical activity where correct installation and verification are essential. Drilling records, grout procedures, tendon details, stressing measurements and testing documentation should be maintained in line with project specifications. Site safety, equipment inspection, safe working platforms and coordination with excavation teams are also important parts of execution.
Jalmala Boring Works follows quality-focused work practices and project-specific execution procedures. Our experience in pile foundations, diaphragm walls and ground anchors allows us to understand the coordination required between different deep foundation activities. For projects involving excavation support and retaining structures, work is planned around approved engineering requirements and site conditions.
Contact an Anchor Piling Contractor in India
If you are planning a deep basement, underground metro structure, retaining wall, industrial facility or infrastructure project that requires ground anchoring, contact Jalmala Boring Works. Share your project location, drawings, ground investigation details and expected construction requirements so our team can understand the scope and discuss the relevant execution approach.
With a legacy dating back to 1962, Jalmala Boring Works continues to provide deep foundation services through experience, modern equipment and project-focused execution. Connect with our team for professional assistance from an experienced anchor piling contractor in India.
Jalmala Boring Works · Since 1962
Discuss Your Ground Anchoring Project
Contact our team for anchor piling, tieback anchoring, diaphragm wall support and deep excavation requirements across India.
Contact: Mr. Amrulla Memon
Phone: +91 93745 45415
Email: jalmala.pile@gmail.com
Location: Sarkhej, Ahmedabad, Gujarat 382210, India
Frequently Asked Questions
Anchor Piling Contractor India FAQs
01What does an anchor piling contractor do?
An anchor piling contractor installs ground anchor systems that transfer structural forces into stable soil or rock. These systems are commonly used to support diaphragm walls, retaining walls, deep excavations, basements and slopes.
02What types of ground anchors does Jalmala Boring Works provide?
Jalmala Boring Works provides permanent and temporary ground anchors, prestressed tieback anchors, rock anchors and anchoring solutions for excavation support, subject to project requirements and approved engineering designs.
03Where are anchor piling systems used?
Anchor piling systems are used for deep basement construction, underground metro stations, diaphragm wall support, retaining structures, industrial foundations, slope stabilisation and infrastructure development.
04Does Jalmala Boring Works provide anchor piling services across India?
Jalmala Boring Works undertakes deep foundation and ground anchoring projects across India, with operations extending across more than 20 states.
05How are ground anchors installed?
Ground anchor installation generally involves setting out, drilling, tendon placement, grouting, curing, stressing, lock-off and load testing. The final procedure depends on the approved design and ground conditions.
06How can I contact Jalmala Boring Works for an anchor piling project?
You can contact Jalmala Boring Works at +91 93745 45415 or email jalmala.pile@gmail.com to discuss your project requirements.
