Bored Cast-in-Situ Piles
Deep foundation piles constructed by drilling boreholes and installing reinforcement and concrete. Used to transfer building loads to suitable bearing strata.
Know More →Jalmala Boring Works provides specialist basement piling and deep excavation foundation solutions for residential, commercial, industrial and infrastructure developments. Our capabilities include bored cast-in-situ piles, secant pile walls, diaphragm walls and ground anchor systems for suitable basement and underground construction projects.
Specialist piling, underground retaining walls and anchoring solutions for demanding construction sites.
Basement construction often involves excavation below existing ground level, sometimes close to neighbouring buildings, roads and underground utilities. The foundation and retaining system must be selected according to soil conditions, groundwater, excavation depth and structural design.
Jalmala Boring Works is a third-generation foundation engineering company with a legacy dating back to 1962. The company specialises in pile foundations, diaphragm walls and ground anchors for residential, commercial, industrial and infrastructure developments.
For basement construction, suitable solutions may include bored piles, secant pile walls, diaphragm walls and ground anchors. These systems can be considered individually or in combination according to the engineering requirements of the project.
Foundation Engineering Legacy
Published Pile Diameter Range
Published D-Wall Thickness Range
Published D-Wall Trench Depth
The selection of a basement retaining and foundation system depends on excavation depth, groundwater conditions, surrounding structures, soil profile and structural design.
Deep foundation piles constructed by drilling boreholes and installing reinforcement and concrete. Used to transfer building loads to suitable bearing strata.
Know More →Overlapping primary and secondary piles form a retaining wall system for suitable basement excavations and ground retention requirements.
Know More →Reinforced concrete underground wall panels used for deep basements, underground structures and retaining applications.
Know More →Temporary or permanent grouted anchors can provide lateral support to retaining walls during deep excavation.
Know More →Anchoring solutions for suitable hard-strata conditions where additional restraint or stabilisation is required by the design.
Know More →Soil reinforcement and slope or excavation cut stabilisation for suitable ground conditions and approved engineering designs.
Know More →Secant pile walls are formed by constructing overlapping concrete piles to create a continuous underground retaining structure. Primary piles are installed first, followed by secondary piles that intersect the primary piles.
This system can be suitable for basement excavations where soil retention and groundwater control are important considerations. The wall arrangement, pile spacing, reinforcement and construction sequence must follow the approved engineering design.
Mark pile positions and establish alignment according to approved drawings.
Construct the initial primary piles along the designed retaining wall alignment.
Install reinforced secondary piles with the required overlap into primary piles.
Complete the designed pile wall arrangement and required quality checks before excavation progresses.
Diaphragm walls are reinforced concrete retaining structures constructed in underground panels. They are used for deep basements, metro systems, underground structures and industrial developments.
Wall thickness in mm
Trench excavation depth
Diaphragm wall construction involves excavating individual panels under slurry support, cleaning the trench, installing reinforcement cages and placing concrete through tremie pipes.
The completed wall can form part of a basement retaining arrangement, subject to structural design, joint details, groundwater conditions and the project's waterproofing requirements.
Discuss Basement Wall Requirements →Ground anchors can provide lateral restraint to retaining walls during deep excavation. The anchor type, length, inclination and capacity must be determined by project-specific geotechnical and structural design.
Temporary grouted anchor systems used to support retaining structures during specified construction and excavation stages.
Permanent anchoring systems designed for long-term restraint where specified by the structural and geotechnical design.
Grouting operations used to form the anchor bond zone according to the approved anchor design and ground conditions.
Anchor systems installed in suitable rock strata for retaining wall support and other designed stabilisation requirements.
Anchor testing and acceptance checks according to the approved project specifications and testing procedures.
Ground anchors can be considered alongside diaphragm walls or other retaining systems where the design requires additional lateral support.
Different drilling methods are selected according to pile dimensions, soil profile, access limitations, groundwater and project specifications.
Rotary drilling equipment for bored cast-in-situ piles across suitable soil and rock conditions.
Percussion drilling with slurry support for suitable ground conditions and deep pile construction.
Truck-mounted rotary rigs with slurry circulation for suitable pile boring requirements.
A drilling option for selected smaller foundation works and locations with restricted equipment access.
Tractor-mounted drilling equipment for suitable medium-depth pile boring applications.
Bentonite or polymer slurry preparation, circulation and desanding for applicable borehole and trench support methods.
A coordinated construction sequence helps integrate foundation and retaining activities with the overall basement construction programme.
Review geotechnical investigation, groundwater information, nearby structures, utilities and excavation requirements.
Review approved drawings and determine the specified pile, secant pile wall or diaphragm wall work package.
Arrange suitable piling rigs, cranes, drilling tools, slurry equipment and supporting machinery.
Carry out drilling or panel excavation, borehole support, reinforcement installation and concrete placement.
Install and grout temporary or permanent anchors where included in the approved retaining wall design.
Coordinate the required testing, construction records and quality checks for the completed work.
Basement construction requires careful planning of foundation and retaining systems. Jalmala Boring Works brings specialist deep foundation experience and equipment capabilities to project discussions.
A third-generation family business with a long-standing presence in deep foundation engineering.
Pile foundations, diaphragm walls and ground anchor systems for different project requirements.
Company-published fleet includes SANY hydraulic piling and diaphragm wall rigs.
Foundation and retaining capabilities relevant to basement and underground construction.
Published project operations across more than 20 Indian states.
Published focus on quality assurance, site safety, slurry management and construction procedures.
Share your project details with Jalmala Boring Works for an initial technical discussion. The foundation method and execution requirements can be reviewed against the available drawings and geotechnical information.
Project name and site location
Proposed basement depth and number of levels
Soil investigation and groundwater report
Basement and retaining wall drawings
Pile or diaphragm wall specifications
Site access and nearby structure details
Required excavation support arrangement
Project schedule and mobilisation requirements
Answers to common questions about basement piling, secant pile walls, diaphragm walls, ground anchors and deep excavation support.
Basement piling involves installing deep foundation piles to support building loads or constructing pile-based retaining systems for basement excavation. The appropriate method depends on structural design, soil conditions, groundwater levels and excavation requirements.
Common methods include bored cast-in-situ piles and secant pile walls. Depending on the excavation design, diaphragm walls and ground anchors may also be used as part of a basement retaining and support system.
A secant pile wall is a retaining structure made from overlapping concrete piles. Primary piles are installed first, followed by secondary piles that intersect them to create a continuous wall. It can provide soil retention and groundwater control when properly designed and constructed.
Diaphragm walls are reinforced concrete retaining walls constructed in underground panels. They are used for deep basements, underground structures and excavations where the project requires a substantial retaining system and suitable groundwater management.
Ground anchors can provide lateral support to retaining walls during excavation. Permanent or temporary grouted anchors may be selected according to soil or rock conditions, wall design, property boundaries and engineering requirements.
Jalmala Boring Works publishes bored cast-in-situ pile capabilities ranging from 300 mm to 1800 mm in diameter, with depths up to 50 metres. Actual project capabilities depend on the approved design, ground conditions and equipment selection.
Basement foundation and retaining methods can be selected to address groundwater conditions. Depending on the design, solutions may include casing, slurry-supported bored piles, secant pile walls, diaphragm walls and suitable ground anchor systems.
Jalmala Boring Works publishes diaphragm wall capabilities with wall thicknesses ranging from 400 mm to 1000 mm and trench excavation depths up to 40 metres. Actual project requirements should be reviewed against the approved design and site conditions.
Share the project location, basement depth, soil investigation report, structural and retaining wall drawings, groundwater information, pile or wall specifications, site access details and expected construction schedule.
You can contact Jalmala Boring Works at +91 93745 45415 or +91 98250 73418, or email jalmala.pile@gmail.com to discuss basement piling and deep excavation foundation requirements.
Contact Jalmala Boring Works for basement piling, secant pile wall, diaphragm wall and ground anchor requirements. Discuss your project drawings, site conditions and deep excavation foundation needs with our team.
Jalmala Boring Works
Deep Foundation Specialists Since 1962
Dholka Road, Near Nariampura Village, Narimanpura, Sarkhej, Ahmedabad, Gujarat – 382210, India.
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Click any image or video to view it in full screen.

















Detailed survey, marking of pile locations, and installation of temporary guide casing.

Drilling of pile bore using Hydraulic Rotary Rig to required depth.

Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.

Fabrication and lowering of reinforcement cage into the bore.

Continuous concrete placement using tremie pipes.

Final pile completion, head trimming, and quality assurance.