Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.










Recent Projects
Pile FoundationConstruction Process







Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening

Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site

Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness

Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement

Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation

Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Leading Hydraulic Piling Contractor in India – Jalmala Boring Works
Hydraulic piling has revolutionized deep foundation construction, offering unmatched precision, speed, and reliability. As a leading hydraulic piling contractor in India, Jalmala Boring Works has been at the forefront of this technology since 1962. Our family-owned, third-generation company operates a modern fleet of SANY hydraulic piling rigs and delivers foundation solutions across 20+ Indian states.
Hydraulic piling rigs use hydraulic power to drive drilling tools, rotary heads, and casing oscillators, enabling precise installation of bored piles, diaphragm walls, and ground anchors. Compared to conventional piling methods, hydraulic piling offers higher torque, deeper reach, reduced vibration, and faster project turnaround. As an experienced hydraulic piling contractor in India, we match the right rig and technique to every site's geotechnical profile.
Why Choose Jalmala Boring Works as Your Hydraulic Piling Contractor in India?
60+ Years of Proven Expertise: Since 1962, we have completed thousands of deep foundation projects using advanced piling technology. Our third-generation leadership blends traditional engineering wisdom with modern innovation. When you hire us as your hydraulic piling contractor in India, you benefit from six decades of successful project delivery.
Modern SANY Hydraulic Rig Fleet: Our fleet of SANY hydraulic piling rigs represents the latest in foundation engineering technology. These machines deliver superior torque, precision depth control, and reliability, allowing us to install large-diameter piles faster and more accurately than conventional methods. As a modern hydraulic piling contractor in India, we continuously invest in equipment upgrades to stay ahead of industry standards.
ISO 9001:2015 Certified Quality: Quality assurance is embedded in every stage of our hydraulic piling process, from geotechnical investigation and rig setup to drilling, reinforcement placement, concrete pouring, and final load testing. Our ISO 9001:2015 certification reflects our commitment to consistent, high-quality results. This is why leading builders trust us as their hydraulic piling contractor in India.
State-Wise Hydraulic Piling Coverage Across India
As a pan-India hydraulic piling contractor in India, we have successfully deployed our SANY rigs in more than 20 states. Our primary coverage includes:
- Gujarat: Ahmedabad, Surat, Vadodara, Rajkot, Bhavnagar, Jamnagar, Gandhinagar, Anand
- Maharashtra: Mumbai, Pune, Nagpur, Nashik, Aurangabad
- Rajasthan: Jaipur, Jodhpur, Udaipur, Kota
- Madhya Pradesh: Indore, Bhopal, Gwalior, Jabalpur
- Uttar Pradesh: Lucknow, Noida, Kanpur, Varanasi
- Karnataka: Bengaluru, Mysuru, Hubballi
- Telangana: Hyderabad, Warangal
Wherever your project is located, our experienced crew and hydraulic rigs can be mobilized to deliver as your trusted hydraulic piling contractor in India.
Our Hydraulic Piling and Deep Foundation Services
As a full-service hydraulic piling contractor in India, we offer a comprehensive range of deep foundation services. Our hydraulic piling services cover bored pile installation, rotary drilling, and large-diameter pile construction. We also specialize in diaphragm wall construction for deep excavation support and groundwater control, as well as ground anchoring for slope stability and lateral support. These three core services—hydraulic piling, diaphragm walls, and ground anchoring—work together to provide complete deep foundation solutions.
Frequently Asked Questions About Hydraulic Piling Contractors in India
What is a hydraulic piling contractor? A hydraulic piling contractor specializes in installing deep foundation piles using hydraulic piling rigs, which offer precision, speed, and reliability for large-scale foundation projects.
Which states in India do you serve? We serve across 20+ Indian states, including Gujarat, Maharashtra, Rajasthan, Madhya Pradesh, Uttar Pradesh, Karnataka, and Telangana.
What are the advantages of hydraulic piling? Hydraulic piling offers higher torque, precision drilling, faster installation, lower vibration, and better quality control compared to conventional piling methods.
Why choose Jalmala Boring Works? With 60+ years of experience, ISO 9001:2015 certification, modern SANY hydraulic piling rigs, and a pan-India presence, we are a trusted partner for hydraulic piling projects.
If you are planning a project that requires an expert hydraulic piling contractor in India, contact Jalmala Boring Works today. Call +91 93745 45415 or email jalmala.pile@gmail.com to discuss your project requirements. Our team is ready to deliver the solid foundation your structure deserves.
