Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.










Recent Projects
Pile FoundationConstruction Process







Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening

Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site

Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness

Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement

Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation

Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Industrial Piling Contractor in India – Jalmala Boring Works
Industrial construction requires reliable foundation systems capable of supporting heavy structural loads, manufacturing facilities, production buildings and large-scale industrial infrastructure. Depending on soil conditions, structural requirements and geotechnical investigation results, pile foundations may be necessary to transfer loads to suitable deeper soil or rock strata. Selecting an experienced industrial piling contractor is an important part of successful foundation construction.
Jalmala Boring Works is a family-owned, third-generation foundation construction company established in 1962. Based in Ahmedabad, Gujarat, the company specialises in bored cast-in-situ pile foundations, diaphragm walls and ground anchors. With more than six decades of industry experience, Jalmala Boring Works undertakes deep foundation projects for industrial, commercial, residential and infrastructure developments across India.
The company operates modern SANY hydraulic piling and diaphragm wall rigs for specialised foundation construction. Its capabilities support industrial developments that require technically planned drilling, reinforcement installation and concreting operations. Explore our industrial piling contractor services in India to understand our construction capabilities.
About Jalmala Boring Works
Foundation engineering is a critical component of industrial development. Manufacturing plants, industrial warehouses, processing facilities and factory buildings have different structural requirements depending on their design, equipment, operational loads and ground conditions.
Since 1962, Jalmala Boring Works has developed foundation construction expertise through three generations of industry involvement. The company specialises in bored cast-in-situ pile foundations, diaphragm wall construction and ground anchoring for projects requiring deep foundation solutions.
Our approach involves understanding structural drawings, geotechnical reports, foundation specifications and site conditions before determining the appropriate construction methodology. Equipment mobilisation and construction planning are carried out according to the technical requirements of each project.
Industrial Pile Foundation Construction Services
Factory Foundation Piling
Factory buildings may require deep foundation systems depending on structural loads, soil conditions and building design. Pile foundations can transfer loads from factory structures to suitable deeper ground layers. Construction activities include bore formation, reinforcement cage installation and concrete placement according to approved engineering drawings.
Manufacturing Plant Piling
Manufacturing plants often involve large building structures, production areas, equipment foundations and supporting infrastructure. Piling requirements are determined through structural engineering and geotechnical investigations. Suitable bored piles provide deep foundation support where specified by the project design.
Industrial Warehouse Foundations
Industrial warehouses and logistics facilities require foundations designed according to building loads, ground conditions and operational requirements. Where shallow foundations are not suitable, bored cast-in-situ piles may be used to provide the required foundation support.
Heavy Industrial Infrastructure Piling
Large industrial infrastructure projects may involve substantial structural loads and challenging subsurface conditions. Deep foundation construction helps support structures where required by engineering specifications. Pile dimensions, drilling depth and construction methods are selected according to project-specific technical requirements.
Industrial Basement and Excavation Support
Some industrial developments require deep basements, underground structures and excavation support systems. Diaphragm walls and ground anchors may be used as part of engineered excavation support solutions. Their construction and installation follow the approved structural and geotechnical specifications.
Industrial Piling Methods and Techniques
Different industrial sites require different piling techniques. Soil composition, groundwater conditions, required pile diameter, drilling depth and site accessibility influence the selection of construction methodology. Jalmala Boring Works uses specialised equipment and construction techniques according to individual project specifications.
Bored Cast-in-Situ Piling
Bored cast-in-situ piling involves drilling a borehole to the specified depth, preparing the bore, lowering reinforcement where required and placing concrete. This method is widely considered for industrial buildings and heavy structural applications where deep foundation support is required.
Hydraulic Rotary Piling
Hydraulic rotary piling uses specialised drilling rigs to construct pile bores according to required dimensions and depths. The drilling process is selected based on ground conditions, project specifications and machinery capabilities. Jalmala Boring Works operates modern SANY hydraulic rotary piling equipment.
DMC Percussion Drilling
DMC percussion methods may be used for piling applications where the ground conditions and project specifications require suitable percussion drilling techniques. The selection of the drilling system depends on subsurface conditions, required pile dimensions and construction requirements.
Industrial Piling Equipment and Technical Capabilities
Industrial foundation construction requires suitable machinery and technical planning. Equipment selection depends on drilling depth, pile diameter, ground conditions, site accessibility and the approved construction methodology.
Jalmala Boring Works uses modern hydraulic rotary rigs and DMC percussion methods for bored cast-in-situ pile construction. The company's published pile foundation capabilities include:
- Pile Diameter: 300 mm to 1800 mm.
- Pile Depth: Up to 50 metres, subject to project and ground conditions.
- Drilling Equipment: Modern SANY hydraulic rotary piling rigs.
- Drilling Methods: Hydraulic rotary drilling and DMC percussion methods.
- Steel Casing: Temporary and permanent casing installation.
- Concreting: Tremie concreting using RMC or site-mix concrete.
- Quality Testing: Static and dynamic pile load testing arrangements.
Industries We Serve
Industrial foundation requirements vary across manufacturing and infrastructure sectors. Jalmala Boring Works undertakes deep foundation construction for different types of developments where piling and related foundation systems are required.
- Manufacturing Industries: Factory buildings, production facilities and manufacturing plants.
- Automotive Industries: Automotive manufacturing facilities and industrial production infrastructure.
- Petrochemical Industries: Industrial facilities and associated infrastructure requiring engineered foundation support.
- Warehousing and Logistics: Industrial warehouses, storage facilities and logistics developments.
- Industrial Parks: Large-scale industrial developments and supporting infrastructure.
- Infrastructure Projects: Bridges, flyovers and other major civil construction developments.
Industrial Piling Project Execution Process
Proper planning is important for industrial pile foundation construction. Each project begins with an understanding of technical drawings, geotechnical investigation reports, foundation requirements and site conditions.
- Project Evaluation: Reviewing structural drawings, pile layouts, geotechnical reports and construction specifications.
- Site Assessment: Evaluating ground conditions, site accessibility and working area requirements.
- Equipment Mobilisation: Selecting and mobilising suitable hydraulic piling rigs and supporting machinery.
- Pile Position Setting Out: Marking pile locations according to approved structural drawings.
- Drilling and Bore Preparation: Constructing boreholes according to specified diameter and depth.
- Reinforcement Installation: Lowering reinforcement cages where required by the structural design.
- Concrete Placement: Carrying out concreting using the specified construction methodology.
- Quality Control: Maintaining construction records and quality checks according to project specifications.
Why Choose Jalmala Boring Works as Your Industrial Piling Contractor?
Choosing an industrial piling contractor requires evaluating experience, equipment, technical expertise and the ability to execute foundation work according to project specifications. Jalmala Boring Works brings more than six decades of foundation construction experience.
- Established in 1962: More than 60 years of foundation construction experience.
- Third-Generation Expertise: Family-owned foundation construction business with generations of industry knowledge.
- Industrial Project Experience: Foundation construction for manufacturing, industrial and infrastructure developments.
- Modern Piling Machinery: Fleet includes SANY hydraulic piling and diaphragm wall rigs.
- Specialised Foundation Services: Bored piling, diaphragm walls and ground anchoring.
- Quality Procedures: ISO 9001:2015 certified processes as stated by the company.
- Pan-India Operations: Ahmedabad-based company undertaking projects across India.
Industrial Piling Contractor in Gujarat and Ahmedabad
Gujarat is an important industrial and manufacturing region with construction requirements across factories, production facilities, warehouses and industrial infrastructure. Industrial developments may require specialised piling contractors depending on soil conditions, structural loads and foundation design.
Jalmala Boring Works is based in Ahmedabad, Gujarat, and undertakes deep foundation construction projects in Ahmedabad and other industrial regions across India. Its capabilities support industrial foundation requirements involving bored cast-in-situ piles, diaphragm walls and ground anchors.
Project execution is planned according to site conditions, geotechnical reports, structural drawings, equipment requirements and construction schedules. The appropriate piling methodology is determined according to approved engineering specifications.
Frequently Asked Questions About Industrial Piling Contractors
What is an industrial piling contractor?
An industrial piling contractor specialises in constructing deep foundation systems for factories, manufacturing plants, warehouses, industrial buildings and heavy industrial infrastructure. These foundations transfer structural loads to suitable deeper soil or rock layers according to geotechnical and structural engineering requirements.
Who is an industrial piling contractor in India?
Jalmala Boring Works is an Ahmedabad-based, third-generation foundation construction company established in 1962. The company provides bored cast-in-situ pile foundation construction for industrial, commercial, residential and infrastructure projects across India.
Why are pile foundations required for industrial buildings?
Pile foundations may be required for industrial buildings when structural loads, soil conditions or geotechnical investigations indicate that deeper foundation support is necessary. They help transfer loads from factory structures, machinery foundations and industrial facilities to suitable ground strata.
What industrial projects require piling contractors?
Industrial piling contractors may be required for manufacturing plants, factories, warehouses, production facilities, petrochemical facilities, industrial parks, power infrastructure and other developments where deep foundations are specified by the structural design.
What types of piling methods are used in industrial construction?
Industrial foundation construction may use bored cast-in-situ piling, hydraulic rotary drilling, DMC percussion methods and other project-specific piling techniques. The appropriate method depends on soil conditions, pile diameter, required depth, groundwater levels and engineering specifications.
What pile foundation capabilities does Jalmala Boring Works offer?
Jalmala Boring Works undertakes bored cast-in-situ pile construction using modern hydraulic rotary rigs and DMC percussion methods. Its published capabilities include pile diameters from 300 mm to 1800 mm and pile depths up to 50 metres, subject to project and site conditions.
Does Jalmala Boring Works undertake factory piling projects?
Yes. Jalmala Boring Works undertakes industrial pile foundation projects for manufacturing facilities and industrial developments. Construction methods and equipment are selected according to project drawings, soil investigation reports and execution requirements.
Where does Jalmala Boring Works provide industrial piling services?
Jalmala Boring Works is headquartered in Ahmedabad, Gujarat, and undertakes deep foundation construction projects across India, depending on project scope and operational requirements.
How can I select an industrial piling contractor?
Consider the contractor's experience, piling machinery, technical capabilities, previous industrial project experience, quality procedures, safety practices and ability to execute work according to approved structural drawings and geotechnical specifications.
How can I contact Jalmala Boring Works for industrial piling?
You can contact Jalmala Boring Works at +91 93745 45415 or email jalmala.pile@gmail.com to discuss industrial piling requirements, project locations, technical drawings and foundation construction specifications.
Contact Jalmala Boring Works for Industrial Piling Projects
Looking for an experienced industrial piling contractor in India for your factory, manufacturing plant, warehouse or industrial infrastructure project? Contact Jalmala Boring Works to discuss your pile foundation requirements. Share your project location, structural drawings, geotechnical report, pile specifications and expected construction schedule to begin a technical discussion.
Jalmala Boring Works
Contact Person: Mr. Amrulla Memon
Phone: +91 93745 45415
Additional Contact: +91 98250 73418
Email: jalmala.pile@gmail.com
Address: Dholka Road, near Nariampura Village, Narimanpura, Sarkhej, Ahmedabad, Gujarat 382210, India.
