Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.










Recent Projects
Pile FoundationConstruction Process







Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening

Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site

Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness

Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement

Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation

Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Pile Foundation Services in Haryana
Jalmala Boring Works provides specialised pile foundation services in Haryana for industrial, commercial, residential and infrastructure construction requirements. Established in 1962, our third-generation family-owned company focuses on deep foundation engineering, pile foundations, diaphragm walls and ground anchoring solutions. We understand that every construction site has different soil conditions, structural loads and engineering requirements. Therefore, foundation methods should be selected according to geotechnical investigation and project specifications.
Our pile foundation capabilities include bored cast-in-situ piling, rotary bored piles, foundation drilling, reinforcement cage installation and tremie concreting. These construction methods can support projects where the upper soil layers require additional load-transfer capacity through deeper foundation elements. Depending on the site investigation, pile diameter, depth, groundwater conditions and equipment accessibility, an appropriate piling approach can be evaluated for the project.
We welcome project enquiries from Gurugram, Faridabad, Panchkula, Ambala, Karnal, Panipat, Sonipat, Rohtak, Hisar, Bhiwani, Rewari, Jhajjar, Bahadurgarh, Palwal, Narnaul, Kaithal, Jind, Sirsa, Fatehabad, Yamunanagar and Kurukshetra. These locations represent potential service enquiry areas; actual project execution is subject to site assessment, mobilisation, logistics and technical feasibility.
Pile foundations are commonly considered for industrial plants, warehouses, factories, commercial buildings, institutional developments, bridges and major infrastructure works. A properly designed deep foundation system transfers structural loads to suitable soil or rock strata. The final piling design and construction procedure should follow the recommendations of qualified geotechnical and structural engineering professionals.
Jalmala Boring Works approaches foundation projects with attention to drilling requirements, reinforcement placement, concrete quality and construction coordination. Our experience in pile foundations, diaphragm wall construction and ground anchoring helps us understand the requirements of challenging foundation and excavation projects. We coordinate project discussions around site conditions, drawings, soil reports and execution requirements.
If you are searching for a pile foundation contractor in Haryana for an upcoming industrial, commercial or infrastructure project, contact Jalmala Boring Works to discuss your requirements. Explore our pile foundation services in Haryana and share your project details for an initial technical discussion. Project suitability, equipment deployment and execution schedules can be evaluated based on the specific site and scope of work.
Frequently Asked Questions
What pile foundation services are available in Haryana?
Pile foundation solutions can include bored cast-in-situ piles, rotary bored piling, foundation drilling, reinforcement cage installation and tremie concreting, depending on project requirements and ground conditions.
Do you undertake pile foundation projects in Gurugram and Faridabad?
Jalmala Boring Works accepts enquiries for suitable foundation projects in Gurugram, Faridabad and other parts of Haryana. Project feasibility depends on site conditions, equipment access, scope and mobilisation requirements.
Which projects require deep pile foundations?
Industrial buildings, commercial developments, high-rise structures, bridges and infrastructure projects may require deep foundations when surface soil cannot provide sufficient bearing capacity.
How is the suitable pile foundation method selected?
The selection depends on the geotechnical investigation, soil profile, groundwater conditions, structural loads, pile depth, site restrictions and project specifications.
How can I request a pile foundation project consultation?
You can contact Jalmala Boring Works by phone or email with your project location, soil investigation details, estimated pile dimensions and construction requirements for an initial discussion.
Planning a Pile Foundation Project in Haryana?
Contact Jalmala Boring Works to discuss your foundation engineering requirements and project specifications.
