Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.










Recent Projects
Pile FoundationConstruction Process







Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening

Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site

Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness

Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement

Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation

Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Pile Load Testing Services in India
Pile load testing is an important part of evaluating deep foundation performance. It provides engineers with actual field information about how a pile responds to applied loads and helps assess the relationship between loading, settlement and displacement. Jalmala Boring Works brings more than six decades of foundation construction experience to projects requiring reliable planning, technical coordination and professional execution.
Established in 1962, Jalmala Boring Works is a third-generation foundation construction company based in Ahmedabad, Gujarat. Our core areas include pile foundations, ground anchoring and diaphragm wall construction. For projects requiring pile load testing, the required testing method, specialist resources and execution arrangements should be evaluated according to the approved project specifications.
Explore Pile Load Testing ServicesUnderstanding Foundation Performance
What Is Pile Load Testing?
Pile load testing is a field procedure used to examine the behaviour of a pile when a controlled load is applied. During the test, engineers monitor the corresponding movement of the pile and evaluate its response under specified loading conditions.
The observations help establish the load-settlement relationship and provide information for reviewing foundation design assumptions. Testing requirements depend on the type of structure, soil conditions, pile dimensions, design loads and applicable engineering standards.
For a project-specific overview, refer to our pile load testing services in India and discuss the proposed testing scope with the responsible project engineer.
Key Information Obtained
- ✓Load and settlement relationship
- ✓Pile movement under applied loading
- ✓Response under compression or uplift
- ✓Lateral displacement behaviour
- ✓Site-specific foundation performance data
- ✓Information for engineering assessment
Types of Testing
Main Types of Pile Load Tests
Different foundation applications require different loading directions and test procedures. The following are the principal static pile load test categories covered under IS 2911 (Part 4).
Vertical Compression Load Test
Evaluates the response of a pile under vertical downward loading. The test helps engineers study load-settlement behaviour and assess the pile's performance under compression.
Pile Load Testing →Lateral Load Test
Examines how a pile responds to horizontal loading. This is relevant to structures exposed to wind, earth pressure, vehicle movement and other lateral forces.
Pile Load Testing →Pull-Out or Uplift Load Test
Studies pile behaviour under upward loading. It helps assess uplift resistance where foundation elements are designed to resist tensile forces.
Pile Load Testing →Indian Standard
Pile Load Testing as per IS 2911 (Part 4)
IS 2911 (Part 4):2013 is titled Design and Construction of Pile Foundations – Code of Practice: Part 4 Load Test on Piles. It provides guidance for evaluating pile performance through vertical compression, lateral and pull-out load tests.
The applicable test procedure, loading sequence, instrumentation, acceptance criteria and reporting requirements should be selected with reference to the current applicable standards, structural design, geotechnical recommendations and project specifications.
Testing is not simply the application of a load. Appropriate preparation of the pile head, reaction arrangement, measuring instruments, reference supports and systematic recording of readings are important parts of a properly planned test.
Learn About Pile Load TestingInitial and Routine Pile Load Testing
The purpose and timing of a pile load test influence whether it is treated as an initial test or a routine test. Both have a role in foundation engineering, but they are carried out for different assessment objectives.
Initial Pile Load Test
An initial load test is generally performed during the early stage of a project on a designated test pile. It helps establish the load-carrying behaviour and provides site-specific information for reviewing foundation design assumptions.
Routine Pile Load Test
Routine load testing is conducted on selected working piles to evaluate their response under the specified test loading. The number of tests, loading procedure and acceptance requirements are determined by the applicable code and project specifications.
The distinction between these tests is important when preparing a foundation quality-control programme. Jalmala Boring Works can discuss the foundation construction requirements and project coordination involved in planning suitable testing arrangements.
View Pile Load Testing Information →Applications of Pile Load Testing in Construction
Pile load testing is relevant to construction projects where deep foundations transfer structural loads through soil or rock layers. The testing programme should reflect the actual foundation design and anticipated loading conditions.
Whether the project involves a commercial building, industrial facility or major infrastructure development, test planning should consider soil investigation, pile installation records, structural loads and site conditions. Our pile load testing services page provides an overview of these foundation assessment requirements.
Project Preparation
Information Required Before Pile Load Testing
A proper review of the project information helps determine the appropriate testing approach. The engineering and testing teams should understand the foundation arrangement before mobilising equipment or preparing the test location.
- ✓Project location and site access details
- ✓Pile diameter, depth and construction type
- ✓Design load and required test load
- ✓Geotechnical investigation report
- ✓Pile installation and concrete records
- ✓Approved drawings and foundation layout
- ✓Applicable testing standards
- ✓Required testing and reporting schedule
Why Proper Test Planning Matters
An unsuitable reaction arrangement, incorrect instrumentation setup or poorly prepared pile head can affect the quality of test observations.
Reference supports and measuring instruments must be arranged appropriately so that readings represent the pile response as accurately as possible.
Test results should be documented and reviewed by qualified professionals before being used for foundation design or acceptance decisions.
Explore Pile Load Testing →Pile Foundation Expertise Across India
Jalmala Boring Works is a family-owned, third-generation foundation construction company established in 1962. With more than 60 years of hands-on industry experience, the company has developed expertise in deep foundation construction and associated ground engineering work.
Our core services include pile foundation construction, ground anchoring and diaphragm wall work. We operate modern SANY hydraulic piling and diaphragm wall rigs, follow ISO 9001:2015 certified processes and undertake operations across more than 20 Indian states.
Based in Ahmedabad, Gujarat, we work with project teams to understand site requirements, foundation methods and construction coordination needs. Specialist load testing arrangements are subject to project scope, equipment availability and the involvement of suitable testing professionals.
For construction requirements in Ahmedabad, Gujarat or other parts of India, contact our team to discuss your pile foundation project and its testing requirements.
Pile Load Testing Services in India →Why Consider Jalmala Boring Works for Foundation Projects?
Established in 1962
More than six decades of foundation construction experience.
Third-Generation Business
Family-owned company with long-standing industry knowledge.
Modern Equipment
Modern SANY hydraulic piling and diaphragm wall rig fleet.
Quality Processes
ISO 9001:2015 certified quality management processes.
Multi-State Operations
Foundation construction operations across 20+ Indian states.
Safety-Focused Work
Emphasis on site safety, planning and construction coordination.
Our experience in pile foundation construction provides an understanding of the site preparation, drilling, foundation execution and coordination considerations involved in deep foundation projects. Discuss your requirements with Jalmala Boring Works for a suitable project-specific approach.
Know More About Pile Load Testing →Ahmedabad, Gujarat, India
Discuss Your Pile Foundation and Testing Requirements
Are you planning a building, industrial or infrastructure foundation project? Jalmala Boring Works can discuss your pile foundation construction requirements and help identify the project information needed for planning suitable testing arrangements.
Share your project location, pile details, design requirements and expected schedule so that the scope can be reviewed. Testing execution and specialist arrangements will be confirmed according to the project-specific requirements.
LOCATION
Dholka Road, Near Nariampura Village, Sarkhej, Ahmedabad, Gujarat 382210, India
Frequently Asked Questions
Pile Load Testing FAQs
What is pile load testing?+
Pile load testing is a field assessment used to understand how a pile foundation responds to an applied load. Measurements such as settlement, displacement and load response help engineers evaluate pile performance.
What are the main types of pile load tests?+
The main static load test categories covered by IS 2911 (Part 4) include vertical compression testing, lateral load testing and pull-out testing. The appropriate test depends on the foundation design and project requirements.
Why is pile load testing important?+
Pile load testing provides site-specific information about foundation behaviour. It can help verify design assumptions, assess load-settlement response and support engineering decisions about foundation performance.
Which Indian Standard covers pile load testing?+
IS 2911 (Part 4):2013, Design and Construction of Pile Foundations - Code of Practice: Part 4 Load Test on Piles, provides guidance for vertical compression, lateral and pull-out load tests. Project teams should verify the applicable current standard and specifications before testing.
What is the difference between an initial and routine pile load test?+
An initial load test is generally performed on a test pile to study its load-carrying behaviour during the early stage of a project. A routine load test is performed on selected working piles to check performance in accordance with the project specifications.
Can pile load testing be carried out in Gujarat?+
Pile load testing can be planned for suitable projects in Gujarat, including Ahmedabad and surrounding locations. Site access, pile details, testing requirements and equipment arrangements must be assessed before confirming the scope.
What information is needed before planning a pile load test?+
Useful information includes pile diameter, pile length, pile type, design load, pile layout, geotechnical report, site location, construction details and the required testing method.
Does pile load testing guarantee foundation safety?+
No single test guarantees the safety of an entire foundation system. Test results must be interpreted by qualified geotechnical and structural professionals alongside design calculations, site investigation and construction quality records.
