Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.
Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.
We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.
Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.
The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.
Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.
The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.
This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.
Recent Projects
Pile FoundationConstruction Process
Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening
Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site
Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness
Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement
Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation
Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Piling Company in Chennai – Built for Marine Clay & Coastal Soil
Piling work in Chennai is not the same as piling on inland ground. The city sits on marine clay in coastal areas, sandy soil along OMR and ECR, and a high water table near the shoreline. Add cyclone wind loads and seismic zone III requirements, and it becomes clear why choosing the right piling company in Chennai matters so much. Jalmala Boring Works brings 60+ years of piling experience and ISO 9001:2015 certified processes to every piling project in Chennai we take on.
Why Chennai Needs Specialized Piling Expertise
Chennai's soil profile changes dramatically over short distances. Marine clay in areas like Besant Nagar, Thiruvanmiyur, and along ECR demands careful shaft friction calculations and conservative settlement estimates. Sandy soil in the OMR corridor can collapse during boring if casing and bentonite are not managed properly. The high water table across coastal Chennai means borehole stability is never optional. A piling company in Chennai who has not worked in these conditions will either over-design and waste money, or under-design and put the structure at risk.
Our Piling & Deep Foundation Services in Chennai
As a specialist piling company in Chennai, we deliver four interconnected deep foundation disciplines. Our piling services use SANY hydraulic piling rigs for high-rise, commercial, industrial, and infrastructure projects across Chennai. Our pile foundation work supports high-rise and industrial structures. Our diaphragm wall construction is trusted for deep basements, metro corridors, and coastal retaining structures. And our ground anchoring systems provide lateral support for slopes, shoring, and excavation support in high-water-table conditions.
Serving Chennai, OMR, ECR, Tambaram & Sriperumbudur
We serve the entire Chennai region — including piling projects along OMR, ECR, Tambaram, Sriperumbudur, Chengalpattu, Kanchipuram, Thiruvallur, Avadi, Ambattur, Porur, and Ennore. Our rigs and teams mobilize quickly across the region, and we coordinate with local consultants and site engineers to keep the programme on track. Whether your project is a high-rise tower along OMR, a commercial complex on ECR, an industrial facility in Sriperumbudur, or infrastructure work in Ennore, our piling company team in Chennai is ready to mobilize.
We also work extensively outside Chennai — our headquarters is in Ahmedabad, and we have active operations across 20+ Indian states. This gives clients in Chennai a partner who can scale with them across multiple sites. When project owners compare piling companies in Chennai, they look for a team that combines local project experience with national execution capability. That is what Jalmala Boring Works delivers.
Safety, Quality, and On-Time Delivery
Chennai's marine clay and high water table demand disciplined bentonite management and trained site teams. Our piling projects in Chennai follow the same ISO 9001:2015 certified processes we use everywhere — third-party inspections, documented safety protocols, and a zero trench collapse record. When you hire Jalmala Boring Works as your piling company in Chennai, you gain a partner who treats your timeline and your safety standards as commitments, not targets.
Contact Our Chennai Piling Team Today
Ready to discuss your piling or pile foundation project in Chennai, Tambaram, Sriperumbudur, or Chengalpattu? Call our team at +91 93745 45415 or email jalmala.pile@gmail.com. Our main office is at Dholka Road, near Nariampura Village, Narimanpura, Sarkhej, Ahmedabad, Gujarat 382210, and we mobilize to Chennai and Tamil Nadu on short notice. For a complete overview of our piling services in Chennai, explore this page and see why project owners across Chennai and India choose Jalmala Boring Works as their piling partner.