Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.










Recent Projects
Pile FoundationConstruction Process







Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening

Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site

Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness

Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement

Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation

Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Piling Company in India – Jalmala Boring Works
Piling is an essential part of deep foundation construction for many infrastructure, industrial, commercial and residential developments. A suitable piling system helps transfer structural loads to deeper and more suitable ground layers when the upper soil cannot provide the required foundation support. Selecting an experienced piling company is therefore an important consideration during construction planning.
Jalmala Boring Works is a family-owned, third-generation foundation construction company established in 1962. With more than 60 years of hands-on industry experience, the company specialises in pile foundations, diaphragm walls and ground anchors. Based in Ahmedabad, Gujarat, Jalmala Boring Works undertakes deep foundation projects across India according to project requirements and operational feasibility.
The company combines generations of industry experience with specialised machinery, including modern SANY hydraulic piling and diaphragm wall rigs. Its work covers different foundation requirements for infrastructure, industrial, commercial and residential construction. Explore our piling company services in India to understand our deep foundation capabilities.
About Jalmala Boring Works
Foundation construction requires practical experience, specialised equipment and an understanding of site-specific ground conditions. Different projects have different requirements based on soil profiles, groundwater levels, structural loads, pile dimensions and construction limitations.
Since 1962, Jalmala Boring Works has been involved in foundation construction through three generations of industry experience. The company's specialised activities include pile foundation construction, diaphragm wall construction and ground anchoring.
Our approach focuses on understanding project drawings, geotechnical information and execution requirements before planning foundation activities. The appropriate equipment and construction methodology are determined according to the specifications and conditions of each project.
Piling and Deep Foundation Services
Pile Foundation Construction
Pile foundations are deep foundation elements used to transfer structural loads to suitable deeper soil or rock strata. They are commonly considered for structures where the ground conditions or structural design require support beyond the upper soil layers. Construction activities may include drilling, bore preparation, reinforcement cage placement and concrete installation according to approved specifications.
Bored Piling
Bored piling involves forming a bore in the ground, installing reinforcement where required and placing concrete to construct the pile. The drilling method, bore stability measures and construction sequence depend on the soil profile, groundwater conditions, pile specifications and site requirements.
Diaphragm Wall Construction
Diaphragm walls are underground reinforced concrete structures used in deep basements, underground infrastructure and excavation support applications. Their construction involves specialised equipment and coordination of excavation, reinforcement installation and concreting operations. Construction must follow the project's approved structural and geotechnical requirements.
Ground Anchoring
Ground anchors are used in suitable engineering applications to support retaining structures, excavation systems and structures exposed to lateral forces. Anchor design, installation and testing requirements depend on the geotechnical conditions and approved engineering specifications.
Piling Solutions for Different Industries
Different sectors require different foundation systems. The selection of piling methods depends on structural design, ground conditions, project location and the construction programme. Jalmala Boring Works undertakes deep foundation work for a range of construction sectors.
- Infrastructure construction: Deep foundation requirements for bridges, flyovers and civil infrastructure developments.
- Industrial construction: Piling work for manufacturing facilities, industrial buildings and warehouses.
- Commercial construction: Foundation work for commercial buildings and large-scale developments.
- Residential construction: Pile foundations for residential buildings and multi-storey developments where required by the structural design.
- Underground construction: Diaphragm walls and foundation-related excavation applications.
Modern Piling Machinery and Equipment
Equipment plays an important role in piling construction. The machinery required for a project depends on drilling depth, pile diameter, soil conditions, site access and the approved construction methodology. Selecting suitable equipment helps align the execution process with the project's technical requirements.
Jalmala Boring Works operates a fleet that includes modern SANY hydraulic piling and diaphragm wall rigs. These specialised machines support the company's deep foundation construction activities. Equipment mobilisation and deployment are planned according to the scope and requirements of individual projects.
In addition to machinery, successful piling operations require coordination between the contractor, client, structural consultant, geotechnical engineer and project management team. This coordination helps ensure that foundation activities follow approved drawings and construction specifications.
Why Choose Jalmala Boring Works?
When selecting a piling company, clients should consider relevant industry experience, equipment, technical capabilities and the contractor's understanding of project requirements. Jalmala Boring Works brings generations of practical involvement in deep foundation construction.
- Established in 1962: More than six decades of foundation industry experience.
- Third-generation company: A family-owned business with generations of practical industry knowledge.
- Specialised foundation work: Pile foundations, diaphragm walls and ground anchors.
- Modern equipment: Fleet includes SANY hydraulic piling and diaphragm wall rigs.
- Multiple project sectors: Experience across infrastructure, industrial, commercial and residential construction requirements.
- India-wide project operations:Ahmedabad-based operations with projects across India, subject to scope and feasibility.
Piling Company in Gujarat and Ahmedabad
Gujarat has diverse construction requirements across infrastructure, industrial, commercial and residential sectors. Depending on the ground conditions and structural requirements, projects in Ahmedabad and other parts of Gujarat may need specialised piling and deep foundation construction.
Jalmala Boring Works is based in Ahmedabad, Gujarat, and undertakes foundation construction projects in the region and other parts of India. The company provides specialised piling-related capabilities for projects that require pile foundations, diaphragm walls and ground anchors.
Before beginning piling work, important project information includes the geotechnical investigation report, structural drawings, pile layout, groundwater conditions, site access and construction schedule. Reviewing these details helps determine an appropriate execution approach.
Our Approach to Piling Project Execution
Every piling project begins with understanding the engineering requirements and available site information. Geotechnical reports provide information about soil layers and groundwater conditions, while structural drawings specify pile locations, dimensions and design requirements.
Depending on the approved piling system, construction activities may include site preparation, equipment mobilisation, setting out, drilling, bore stability measures, reinforcement placement and concreting. Quality checks and construction records should be maintained according to the project's specifications.
Jalmala Boring Works focuses on project-specific planning, practical execution and coordination with the wider construction team. Foundation activities are carried out in accordance with the approved drawings, technical specifications and site requirements.
Frequently Asked Questions About Piling Companies
Which piling company provides deep foundation services in India?
Jalmala Boring Works is an Ahmedabad-based, third-generation foundation construction company specialising in pile foundations, diaphragm walls and ground anchors. The company has been involved in deep foundation construction since 1962.
What services does a piling company provide?
A piling company may provide pile foundation construction, bored piling, drilling, reinforcement placement and concreting. Depending on its equipment and technical capabilities, it may also undertake diaphragm wall construction and ground anchoring.
Does Jalmala Boring Works undertake projects across India?
Jalmala Boring Works is based in Ahmedabad, Gujarat, and undertakes deep foundation projects across India depending on project scope, site conditions and operational feasibility.
What types of projects require piling services?
Piling services may be required for bridges, flyovers, industrial facilities, commercial buildings, residential towers and infrastructure developments where the structural design and ground conditions require deep foundation support.
What piling equipment does Jalmala Boring Works operate?
Jalmala Boring Works operates a fleet that includes modern SANY hydraulic piling and diaphragm wall rigs. Equipment deployment depends on the technical and site requirements of each project.
How is the right piling method selected?
The piling method is selected according to geotechnical investigation results, structural loads, groundwater conditions, pile dimensions, site accessibility and the approved engineering specifications.
Where is Jalmala Boring Works located?
Jalmala Boring Works is located on Dholka Road, near Nariampura Village, Narimanpura, Sarkhej, Ahmedabad, Gujarat 382210, India.
Contact Jalmala Boring Works for Piling Requirements
If you are searching for a piling company in India for an infrastructure, industrial, commercial or residential project, contact Jalmala Boring Works to discuss your requirements. Sharing the project location, geotechnical report, structural drawings and preliminary pile specifications can help begin a technical discussion.
Jalmala Boring Works
Contact Person: Mr. Amrulla Memon
Phone: +91 93745 45415
Email: jalmala.pile@gmail.com
Address: Dholka Road, near Nariampura Village, Narimanpura, Sarkhej, Ahmedabad, Gujarat 382210, India.
