JBW
Jalmala Boring WorksSpecializing in Pile FoundationsPartnered with India's Leading Builders & ContractorsSpecializing in Diaphragm WallSpecializing in Ground AnchorsSince 1962500+ ProjectsSpecializing in Pile FoundationsSpecializing in Diaphragm WallSpecializing in Ground AnchorsJalmala Boring WorksSince 1962Partnered with India's Leading Builders & ContractorsJalmala Boring WorksSpecializing in Pile FoundationsPartnered with India's Leading Builders & ContractorsSpecializing in Diaphragm WallSpecializing in Ground AnchorsSince 1962500+ ProjectsSpecializing in Pile FoundationsSpecializing in Diaphragm WallSpecializing in Ground AnchorsJalmala Boring WorksSince 1962Partnered with India's Leading Builders & Contractors
Gmail
Diaphragm Wall — Jalmala Boring Works
40mMax Depth
Our Service

Diaphragm Wall

Deep Excavation & Retaining Wall Specialists

Jalmala Boring Works specializes in Diaphragm Wall Construction for deep excavations, basements, metro projects, commercial developments, and industrial infrastructure. We execute complete diaphragm wall work from 400 mm to 1200 mm thickness and depths of up to 40 metres, delivering watertight, high-strength retaining walls with minimal ground movement. Our end-to-end solution includes guide wall construction, slurry-supported panel excavation, reinforcement cage installation, tremie concreting, water-stop systems, and quality-controlled execution.

Diaphragm Walls: 400 mm – 1200 mm Thickness
Excavation Depths: Up to 40 Metres
Guide Wall Construction & Panel Excavation
Bentonite / Polymer Slurry Stabilization
Reinforcement Cage Installation
Tremie Concreting & Water-Stop Systems
Low Vibration & Watertight Retaining Walls
Ideal for Basements, Metro Stations, Underpasses & Industrial Projects
Jalmala Boring Works

Diaphragm WallConstruction Process

A step-by-step overview of how Jalmala Boring Works constructs high-quality Diaphragm Walls — from guide wall installation to final panel completion — with precision, safety, and six decades of expertise.

Step 01 – Survey, Setting Out & Guide Wall ConstructionStep 02 – Slurry Preparation & Panel ExcavationStep 03 – Joint Formation & Trench CleaningStep 04 – Reinforcement Cage InstallationStep 05 – Tremie ConcretingStep 06 – Panel Completion, Quality Control & Wall Formation
Active Step01 — Survey, Setting Out & Guide Wall Construction
01/06
Step 01 – Survey, Setting Out & Guide Wall Construction
Active Step01 — Survey, Setting Out & Guide Wall Construction
01

Survey, Setting Out & Guide Wall Construction

Detailed survey, panel marking, and guide wall construction for accurate alignment.

  • Detailed survey and panel layout marking
  • Construction of reinforced concrete guide walls
  • Establishes accurate wall alignment
  • Supports excavation equipment
  • Prevents top soil collapse during excavation
Phase 1
Step 02 – Slurry Preparation & Panel Excavation
Active Step02 — Slurry Preparation & Panel Excavation
02

Slurry Preparation & Panel Excavation

Preparation of slurry and excavation of diaphragm wall panels.

  • Preparation of bentonite/polymer slurry
  • Excavation using Hydraulic Grab or Hydromill
  • Continuous slurry circulation for stability
  • Excavation to required depth and founding strata
  • Regular monitoring of depth and verticality
Phase 2
Step 03 – Joint Formation & Trench Cleaning
Active Step03 — Joint Formation & Trench Cleaning
03

Joint Formation & Trench Cleaning

Formation of watertight joints and cleaning of excavated trench.

  • Installation of Stop-End Pipes
  • PVC Water Stopper installation
  • Formation of watertight panel joints
  • Desanding and slurry cleaning
  • Removal of sediment from trench bottom
  • Final trench inspection
Phase 3
Step 04 – Reinforcement Cage Installation
Active Step04 — Reinforcement Cage Installation
04

Reinforcement Cage Installation

Fabrication and placement of reinforcement cage into trench.

  • Fabrication as per approved drawings
  • Installation of spacers and couplers
  • Lowering cage into slurry-filled trench
  • Maintains required concrete cover
  • Pre-concreting quality inspection
Phase 4
Step 05 – Tremie Concreting
Active Step05 — Tremie Concreting
05

Tremie Concreting

Continuous concrete placement using tremie pipes.

  • Installation of tremie pipes
  • Concrete poured from bottom to top
  • Displacement and recovery of slurry
  • Single uninterrupted concreting operation
  • Formation of reinforced concrete wall panels
Phase 5
Step 06 – Panel Completion, Quality Control & Wall Formation
Active Step06 — Panel Completion, Quality Control & Wall Formation
06

Panel Completion, Quality Control & Wall Formation

Final wall formation, testing, and quality assurance activities.

  • Removal of stop-end elements
  • Construction of secondary panels
  • Formation of continuous watertight wall
  • Verification of alignment and thickness
  • Concrete quality testing and records
  • Wall head trimming for capping beam
Phase 6
Precise Verticality
Watertight Wall
Urban-Friendly
Minimal Vibration
Featured Work

Recent Projects

2025–26
CALICA ECO SPACES PVT LTD
3 Eye Residence
Satellite, Ahmedabad, Gujarat
2025–26
CALICA ECO SPACES PVT LTD
3rd Eye Residence
Sabarmati, Ahmedabad, Gujarat
2025–26
SUROJ BUILDCON PVT LTD
Aggarwal Metals Works
Vithalpur, Gujarat
Underground Foundation Construction

Underground Diaphragm Wall Contractor in India

Jalmala Boring Works provides underground diaphragm wall construction solutions for deep basements, underground structures, metro infrastructure and specialised foundation projects across India. Established in 1962, our family-owned, third-generation company brings more than six decades of practical experience in pile foundations, diaphragm walls and ground anchors.

Underground construction requires careful planning because excavation activities can affect surrounding soil, groundwater and existing structures. Diaphragm walls are reinforced concrete retaining systems constructed below ground level to support excavation and, where included in the structural design, form part of the permanent underground structure. Our modern SANY hydraulic piling and diaphragm wall equipment supports project-specific construction requirements.

Underground Construction Solutions

Reinforced Concrete Walls for Underground Structures

Underground diaphragm walls provide a retaining structure for projects where excavation extends significantly below existing ground level. They can be designed to resist lateral soil and groundwater pressures and may also serve as permanent external basement walls. Their suitability depends on the geotechnical investigation, structural design, excavation sequence and surrounding site conditions.

Underground Basements

Retaining wall construction for multi-level basement developments.

Metro Infrastructure

Underground station boxes and associated infrastructure structures.

Underground Parking

Diaphragm wall applications for below-ground parking facilities.

Deep Excavation

Ground-retention systems for technically demanding excavation projects.

Project Applications

Where Are Underground Diaphragm Walls Used?

Underground diaphragm walls are considered for construction projects where ground retention, underground structural boundaries and excavation support are important. The wall configuration and construction methodology are selected according to engineering requirements.

Deep Basement Buildings

Underground retaining walls for commercial towers, residential complexes, offices and mixed-use developments.

Metro Rail Stations

Diaphragm wall construction for underground metro stations, access shafts and related structures.

Underground Tunnels

Retaining wall applications for selected tunnel-related structures and underground access facilities.

Commercial Developments

Foundation and retaining wall requirements for large commercial buildings with underground levels.

Industrial Structures

Underground foundation and retaining systems for industrial facilities and specialised infrastructure.

Urban Infrastructure

Ground-retention applications for underground utilities and infrastructure in developed areas.

Construction Methodology

Underground Diaphragm Wall Construction Process

Diaphragm wall construction is generally completed panel by panel using specialised excavation equipment and a stabilising support fluid. The construction sequence is planned according to ground conditions, panel dimensions, design drawings and project specifications.

01

Site Preparation

Prepare the working platform, construction access and equipment positioning area.

02

Guide Wall Installation

Construct guide walls to establish the alignment and dimensions of the diaphragm wall panels.

03

Underground Panel Excavation

Excavate individual panels using suitable hydraulic or mechanical equipment under stabilising slurry.

04

Trench Cleaning

Clean the excavated trench and check slurry characteristics according to project specifications.

05

Reinforcement Cage Placement

Lower the designed reinforcement cage into the prepared excavation using appropriate lifting arrangements.

06

Tremie Concreting

Place concrete through tremie pipes to form the reinforced concrete diaphragm wall panel.

The construction team must maintain appropriate excavation stability, panel alignment and slurry properties throughout the work. Reinforcement installation and tremie concreting are carried out according to the approved methodology. Panel joints and continuity are also important considerations for the completed underground wall.

Engineering Requirements

Planning Underground Diaphragm Wall Construction

Underground diaphragm wall projects require detailed planning before excavation begins. Geotechnical investigation, groundwater conditions, nearby foundations and proposed structural loads influence the wall design and construction methodology.

The structural design must determine wall thickness, reinforcement, embedment depth and the required temporary or permanent support arrangements. Depending on the project, the wall may work with internal struts, ground anchors or permanent basement slabs.

Important Project Considerations

  • ✓Soil investigation and subsurface conditions
  • ✓Groundwater level and water pressure
  • ✓Underground excavation depth
  • ✓Diaphragm wall thickness and reinforcement
  • ✓Nearby buildings and existing foundations
  • ✓Underground utilities and site access
  • ✓Panel joints and concrete quality
  • ✓Wall movement and ground settlement monitoring

Why Choose Jalmala Boring Works

Experienced Underground Diaphragm Wall Specialists

Jalmala Boring Works is a family-owned, third-generation foundation construction company specialising in pile foundations, diaphragm walls and ground anchors since 1962. Our experience in foundation construction, combined with modern SANY hydraulic piling and diaphragm wall rigs, supports specialised underground construction requirements across India.

Since 1962

More than six decades of foundation construction experience.

Third-Generation Company

Family-owned business with established foundation engineering experience.

Modern SANY Equipment

Hydraulic piling and diaphragm wall rigs for specialised construction work.

India-Wide Capabilities

Foundation construction capabilities for projects across India.

Project Coordination

Focus on site preparation, equipment deployment and construction planning.

Quality and Safety Focus

Attention to approved project specifications and site safety requirements.

Underground Construction Across India

Underground Diaphragm Wall Construction for Modern Infrastructure Projects

Underground diaphragm wall construction is an important part of modern foundation engineering. As urban areas expand and construction projects require deeper underground spaces, developers need retaining systems that can be designed for challenging soil and groundwater conditions. Diaphragm walls are reinforced concrete structures constructed below ground level and are commonly considered for deep basements, underground metro stations, commercial buildings and major infrastructure developments.

Jalmala Boring Works provides underground diaphragm wall construction capabilities for projects across India. Established in 1962, the company is a family-owned, third-generation foundation contractor with experience in pile foundations, diaphragm walls and ground anchors. Our modern fleet of SANY hydraulic piling and diaphragm wall rigs supports specialised foundation construction requirements. We approach each project according to its site conditions, engineering requirements and construction specifications.

One of the major applications of an underground diaphragm wall is deep basement construction. Commercial complexes, residential towers, hotels, hospitals and office developments often require underground levels for parking, utilities, storage and building services. A diaphragm wall can act as a retaining structure during excavation and may also become part of the permanent basement wall when incorporated into the structural design.

Underground diaphragm walls are also used in metro rail infrastructure and other underground transportation developments. Underground station boxes, access shafts and related structures may require substantial excavation support. In dense urban locations, retaining wall selection must account for nearby buildings, existing foundations, roads and underground utilities. A properly engineered diaphragm wall can provide a relatively stiff retaining system for these challenging construction environments.

The typical diaphragm wall construction process starts with site preparation and guide wall installation. Individual panels are excavated using suitable hydraulic grabs or trench cutters while stabilising slurry supports the excavation. After excavation reaches the specified depth, trench cleaning and slurry checks are completed. Reinforcement cages are then installed and concrete is placed through tremie pipes. Panel sequencing and joint construction are important for achieving continuity in the completed underground wall.

Groundwater management is another important consideration in underground construction. The design team must evaluate water levels, potential seepage paths, hydrostatic pressure and the required performance of wall joints. Diaphragm walls can provide a groundwater barrier when designed and constructed with appropriate joint and detailing arrangements. However, the actual water-control performance depends on ground conditions, construction quality and the complete waterproofing design.

The structural performance of an underground diaphragm wall depends on wall dimensions, reinforcement, embedment, soil properties and the excavation support arrangement. Depending on project requirements, temporary steel struts, ground anchors or permanent basement slabs may provide additional lateral support. Engineering teams may also specify monitoring systems to measure wall movement, ground settlement and the response of nearby structures during excavation.

Underground diaphragm wall projects are undertaken in different regions of India, including Gujarat, Maharashtra, Rajasthan, Madhya Pradesh, Delhi, Uttar Pradesh, Karnataka and Telangana. Each location presents different geotechnical conditions and construction challenges. Jalmala Boring Works is based in Ahmedabad, Gujarat, and supports foundation construction requirements with a pan-India project approach.

Selecting an experienced underground diaphragm wall contractor is important for the coordination of excavation, reinforcement installation, concreting and quality-control activities. Project owners and construction companies should evaluate relevant experience, equipment availability, proposed construction methodology and compliance with approved engineering specifications before starting work.

With a foundation construction legacy dating back to 1962, Jalmala Boring Works combines practical industry experience with modern machinery for specialised foundation projects. Whether the requirement involves an underground basement, metro infrastructure, commercial development or industrial structure, our team can discuss the project scope and technical requirements. Contact Jalmala Boring Works for underground diaphragm wall construction enquiries across India.

Frequently Asked Questions

Underground Diaphragm Wall FAQs

What is an underground diaphragm wall?+

An underground diaphragm wall is a reinforced concrete wall constructed in the ground, generally panel by panel, to provide earth retention and form part of an underground structure. It is commonly used for deep basements, metro stations, underground parking and infrastructure projects.

Where are underground diaphragm walls used?+

Underground diaphragm walls are used in deep basement construction, underground metro stations, tunnels, commercial developments, underground parking facilities, industrial structures and major infrastructure projects.

How is an underground diaphragm wall constructed?+

Construction generally involves guide wall installation, panel excavation under stabilising slurry, trench cleaning, reinforcement cage installation and concrete placement through tremie pipes. The exact methodology depends on the project design and ground conditions.

Can a diaphragm wall become a permanent basement wall?+

Yes. A diaphragm wall can serve as a permanent basement retaining wall when it is designed and detailed for the required permanent structural, durability and waterproofing requirements.

What equipment is used for underground diaphragm wall construction?+

Depending on the ground conditions and project requirements, construction may use hydraulic diaphragm wall grabs, trench cutters, cranes, slurry mixing and desanding systems, reinforcement handling equipment and tremie concreting arrangements.

Does Jalmala Boring Works undertake underground diaphragm wall projects across India?+

Jalmala Boring Works undertakes specialised foundation and diaphragm wall construction work for projects across India. Equipment, methodology and project feasibility are evaluated according to site-specific requirements.

Planning an Underground Construction Project?

Contact Jalmala Boring Works to discuss your underground diaphragm wall and deep foundation construction requirements. Share your project location, drawings and technical specifications with our team.

Jalmala Boring Works | Since 1962 | Ahmedabad, Gujarat, India

Contact: +91 93745 45415 | jalmala.pile@gmail.com