Pile Foundation
Bored Cast-in-Situ Piling Specialists
Jalmala Boring Works provides Pile Foundation and Deep Foundation Solutions using Bored Cast-in-Situ Piles for residential, commercial, industrial, and infrastructure projects. With advanced Hydraulic Rotary Rigs, we construct piles from 300 mm to 1800 mm diameter and depths of up to 50 metres, delivering reliable load-bearing capacity across soft soil, hard rock, and high groundwater conditions.

Our Piling Methods
We deploy six proven techniques — selected based on soil profile, site constraints, and project requirements.

We specialize in bored piling with diameters ranging from 200 mm to 2000 mm and depths up to 50 meters. Using advanced hydraulic rotary rigs, we execute piling operations efficiently across a wide range of soil conditions. Our fleet includes high-performance rotary drilling rigs capable of working in restricted headroom areas while delivering precision, stability, and high productivity.

Secant pile walls are constructed by intersecting reinforced concrete piles to form a continuous retaining structure. Primary piles are installed first, followed by reinforced secondary piles after sufficient curing. This technique provides excellent groundwater control and soil retention, making it ideal for deep excavations, basements, and foundation support in challenging ground conditions.

The Manual Auger Method is a reliable piling technique suitable for locations with restricted access or where low noise and vibration are essential. A tripod and manual winch system are used to drill boreholes using a helical auger. This method is commonly employed for pile diameters ranging from 250 mm to 1000 mm and offers an economical solution for smaller foundation projects.

Our Truck Mounted Rotary (TMR) rigs utilize continuous bentonite slurry circulation to stabilize boreholes during drilling. Auger drilling is performed to the required depth while bentonite slurry supports the excavation and carries excavated soil back to a recycling tank. This method ensures bore stability, efficient spoil removal, and high productivity, particularly in loose or soft soil strata.

The DMC Pile Method employs Mendola-type rigs combined with bentonite drilling fluid for safe and efficient pile construction. Surface soil is loosened using a bailer before drilling continues with a percussion chisel. Bentonite slurry stabilizes the bore while transporting excavated material to settling pits. Once the desired depth is achieved, the drilling tools are removed and the final depth is verified before reinforcement and concreting.

This method utilizes tractor-mounted rotary drilling rigs for fast and economical pile boring. Auger drilling is carried out to the required depth, with DMC rods added progressively to achieve deeper penetration through varying soil strata. It is particularly suitable for medium-depth foundation works and offers drilling capacities of up to 16 meters with excellent operational efficiency.
Our Work in Action
Click any image or video to view it in full screen.










Recent Projects
Pile FoundationConstruction Process







Survey, Setting Out & Guide Casing Installation
Detailed survey, marking of pile locations, and installation of temporary guide casing.
- Detailed survey and marking of pile locations
- Verification of pile coordinates and levels
- Positioning of Hydraulic Rotary Piling Rig
- Installation of temporary guide casing
- Ensures accurate pile alignment and protects bore opening

Pile Boring & Excavation
Drilling of pile bore using Hydraulic Rotary Rig to required depth.
- Drilling of pile bore using Hydraulic Rotary Rig
- Excavation carried out to the required depth and founding strata
- Suitable drilling tools used for soil, rock, or hard strata
- Continuous monitoring of depth, verticality, and pile diameter
- Removal and disposal of excavated soil from site

Slurry Support & Borehole Cleaning
Preparation and circulation of Bentonite/Polymer Slurry and borehole cleaning.
- Preparation and circulation of Bentonite/Polymer Slurry
- Stabilization of borehole walls during drilling
- Recycling of slurry through slurry plant
- Cleaning of borehole bottom to remove loose sediments
- Final inspection of bore depth and cleanliness

Reinforcement Cage Installation
Fabrication and lowering of reinforcement cage into the bore.
- Fabrication of reinforcement cage as per approved drawings
- Installation of spacers, couplers, lifting points, and cover blocks
- Lowering of reinforcement cage into the completed bore
- Accurate positioning and level adjustment
- Quality inspection before concrete placement

Tremie Concreting
Continuous concrete placement using tremie pipes.
- Installation of tremie pipes up to borehole bottom
- Continuous placement of concrete from bottom to top
- Prevention of concrete segregation through tremie method
- Displacement and recovery of slurry during concreting
- Completion of pile concreting in one uninterrupted operation

Pile Completion & Quality Control
Final pile completion, head trimming, and quality assurance.
- Extraction of temporary casing during or after concreting
- Recording of concrete consumption and pile parameters
- Pile head chipping up to cut-off level
- Verification of pile depth, diameter, and concrete quality
- Completion of testing, documentation, and quality assurance
- Ready for pile cap and foundation construction
Pile Foundation Services in Gujarat
Where to Find a Pile Foundation Contractor in Gujarat?
Finding the right pile foundation contractor is an important step when planning a residential, commercial, industrial or infrastructure construction project. A suitable contractor should have relevant technical experience, trained site personnel, appropriate piling equipment and the ability to execute foundation work according to the approved structural and geotechnical design. If you are searching for where to find a pile foundation contractor in Gujarat, Jalmala Boring Works is an Ahmedabad-based foundation construction company you can contact for project enquiries.
Jalmala Boring Works is a third-generation, family-owned company with experience dating back to 1962. The company specialises in pile foundations, diaphragm walls and ground anchoring-related construction. Its services support projects that require deep foundation solutions, including industrial facilities, commercial developments, residential buildings and infrastructure works.
1. Contact an Experienced Piling Contractor in Gujarat
When looking for a piling contractor, begin by checking the company's experience with the type of foundation required for your project. Pile foundation construction involves specialised machinery, borehole preparation, reinforcement installation, concreting procedures and quality checks. A contractor should understand how different ground conditions can affect the construction process.
Jalmala Boring Works operates from Ahmedabad, Gujarat, and provides piling services for projects in different locations. Its experience in deep foundation construction makes it a company to consider when evaluating contractors for a project in Gujarat. Project coverage and mobilisation are assessed according to site location, scope, technical requirements and equipment availability.
2. Check the Contractor's Pile Foundation Capabilities
Before appointing a contractor, review the pile diameter, drilling depth, equipment and construction methods required for your project. Jalmala Boring Works provides bored cast-in-situ pile foundation services. Its published service capabilities include pile diameters from 300 mm to 1800 mm and depths up to 50 metres. These are capability references; the actual pile size and depth must be established through project design and ground investigation.
Bored cast-in-situ piles are constructed by drilling a borehole to the specified depth, preparing and cleaning the bore, lowering the reinforcement cage and placing concrete using the approved concreting procedure. Depending on the ground conditions and design requirements, temporary or permanent casing and suitable borehole support methods may be required.
3. Evaluate Equipment and Construction Methods
Piling equipment should be suitable for the project location, soil profile, required pile dimensions and working conditions. Jalmala Boring Works uses hydraulic rotary piling rigs and DMC percussion methods for relevant foundation activities. The company also lists tremie concreting, temporary and permanent steel casing, and pile load testing among its piling capabilities.
The selection of a piling method should not be based only on equipment availability. Soil investigation results, groundwater level, obstructions, nearby structures, working platform conditions and the structural design all influence the appropriate construction method.
4. Choose a Contractor for Your Project Type
Different projects have different foundation requirements. Industrial plants may require foundations designed for heavy equipment and operational loads. Commercial and residential developments may require piling based on building loads, soil conditions and available site space. Infrastructure projects may involve specialised foundation requirements and construction schedules.
Jalmala Boring Works provides deep foundation services for residential, commercial, industrial and infrastructure-related construction. The company can review the available project information to understand whether its equipment and execution capabilities are suitable for the proposed work.
5. Consider Project Locations Across Gujarat
Gujarat has a wide range of construction and industrial locations, including Ahmedabad, Sanand, Vadodara, Surat, Rajkot, Bharuch, Dahej, Mundra, Vapi, Ankleshwar and other developing areas. Each location may have different soil profiles, groundwater conditions, site access restrictions and project requirements.
If your project is located outside Ahmedabad, provide the contractor with the exact site location and project details. Jalmala Boring Works can review enquiries for projects across Gujarat and assess mobilisation based on the project scope, equipment requirements and construction schedule.
6. Review Quality Control and Pile Testing
Foundation quality is essential because piles transfer structural loads into the supporting soil or rock. Before finalising a contractor, discuss the inspection and quality-control procedures planned for the work. These may include monitoring bore depth and verticality, checking reinforcement cage details, reviewing concrete placement records and maintaining relevant construction documentation.
Depending on the approved project specifications, static or dynamic pile load testing may be required to evaluate pile performance. Testing requirements, acceptance criteria and reporting should be coordinated with the project's geotechnical consultant, structural engineer and relevant authorities.
7. Why Consider Jalmala Boring Works?
Jalmala Boring Works has been involved in deep foundation construction since 1962. As a third-generation family-owned company, it focuses on pile foundations, diaphragm walls and ground anchoring-related work. Its capabilities include bored cast-in-situ piling, hydraulic rotary drilling, DMC percussion methods, casing installation, tremie concreting and pile load testing.
The company also operates modern SANY hydraulic piling and diaphragm wall equipment for relevant construction activities. Its Ahmedabad location provides a point of contact for contractors, developers, consultants and project owners looking for deep foundation services in Gujarat.
8. Information to Share Before Requesting a Quotation
To help a piling contractor understand your project, prepare the available technical information before requesting a quotation. Sharing accurate details can make the initial project review more useful and help identify important site requirements.
- Project name and complete site location.
- Geotechnical or soil investigation report.
- Structural drawings and pile layout.
- Required pile diameter and estimated depth.
- Approximate number and quantity of piles.
- Groundwater and site-access information.
- Expected project start date and schedule.
- Special testing and quality requirements.
The final construction method, equipment, commercial quotation and execution schedule should be confirmed after reviewing the available drawings, specifications and site conditions.
Find a Pile Foundation Contractor in Gujarat
If you are looking for a pile foundation contractor in Gujarat, contact Jalmala Boring Works to discuss your construction requirements. Based in Ahmedabad, the company provides deep foundation services for different types of construction projects and can review project enquiries from locations across Gujarat.
For project details, technical discussions or quotation enquiries, call +91 93745 45415 or email jalmala.pile@gmail.com. Share your project drawings, soil report, pile specifications and location so the team can review your requirements.
Explore this page for more information about where to find a pile foundation contractor in Gujarat and the services offered by Jalmala Boring Works.
Contact Jalmala Boring Works
Planning a Pile Foundation Project in Gujarat?
Contact our team to discuss your pile foundation requirements, project location, technical specifications and construction schedule.
Company: Jalmala Boring Works
Phone: +91 93745 45415
Email: jalmala.pile@gmail.com
Address: Dholka Road, near Nariampura Village, Sarkhej, Ahmedabad, Gujarat 382210, India
Frequently Asked Questions
Where can I find a pile foundation contractor in Gujarat?
You can contact Jalmala Boring Works in Ahmedabad, Gujarat, for pile foundation and deep foundation project enquiries. The company provides bored cast-in-situ piling services and works on residential, commercial, industrial and infrastructure projects across India.
Which pile foundation contractor provides services across Gujarat?
Jalmala Boring Works is based in Ahmedabad and undertakes piling and deep foundation projects across different locations, subject to project requirements, site conditions, equipment availability and mobilisation planning.
What type of pile foundation work does Jalmala Boring Works provide?
The company specialises in bored cast-in-situ pile foundations using hydraulic rotary rigs and DMC percussion methods. Related work includes temporary and permanent casing, tremie concreting and pile load testing.
What pile diameter and depth can be considered?
Jalmala Boring Works lists bored cast-in-situ pile capabilities from 300 mm to 1800 mm diameter and depths up to 50 metres on its pile foundation service information. Actual dimensions and depth depend on geotechnical investigation, structural design and site conditions.
Does Jalmala Boring Works undertake industrial and infrastructure projects?
Yes. The company provides deep foundation services for industrial, commercial, residential and infrastructure developments. The suitable piling method is selected according to the project design, ground conditions and construction requirements.
How can I request a pile foundation quotation?
You can contact Jalmala Boring Works by phone or email. Share your project location, soil investigation report, pile layout, required pile diameter and depth, estimated quantity and project schedule to help the team review your requirements.
