
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Which Retaining System Is Suitable for Deep Basement?
Selecting the right retaining system is an important consideration in deep basement construction. Excavation below ground level requires a properly engineered support structure to resist lateral earth pressure, manage groundwater conditions and protect neighbouring buildings. Diaphragm walls, secant pile walls and contiguous pile walls are commonly evaluated for basement excavation projects. Jalmala Boring Works is a third-generation family-owned foundation construction company with experience dating back to 1962, specialising in pile foundations and diaphragm wall construction.
Diaphragm Wall Systems for Deep Basement
Diaphragm walls are widely considered for multi-level basement construction, underground parking facilities, commercial developments and large infrastructure projects. These reinforced concrete retaining structures are constructed using specialised trench excavation techniques and controlled concreting operations. They provide lateral earth retention and can help reduce groundwater ingress when suitable construction methods and joint details are adopted. Diaphragm walls are particularly relevant for deep excavations in congested urban environments where ground movement must be carefully controlled.
Secant Pile Walls for Basement Excavation
Secant pile walls are constructed using overlapping concrete piles to create a continuous retaining barrier. The system generally includes primary and reinforced secondary piles. It may be considered for basement excavations where soil retention and groundwater control are important. Pile diameter, spacing, reinforcement, construction sequence and wall stiffness are determined according to engineering requirements and site conditions.
Contiguous Pile Walls for Retaining Applications
Contiguous pile walls consist of closely spaced piles arranged along the excavation boundary. They can provide lateral support for suitable basement excavation projects. However, gaps between adjacent piles may allow groundwater or soil migration, so additional measures may be necessary depending on the ground profile and groundwater conditions. The system is selected after evaluating excavation requirements and permissible ground movement.
Ground Anchors and Lateral Excavation Support
Ground anchors can be used alongside diaphragm walls and pile retaining systems to provide additional lateral restraint. These systems transfer tensile forces into suitable ground strata through engineered anchorage arrangements. Ground anchors may be considered for deep basement projects where sufficient anchorage length and permissible land access are available. Their design must account for soil characteristics, structural loads, underground utilities and adjacent property boundaries.
Important Factors for Retaining System Selection
The selection of a deep basement retaining system depends on several technical factors. Excavation depth, soil profile, groundwater table, earth pressure, adjacent building foundations and construction access must be assessed. Structural stiffness, allowable ground movement, waterproofing requirements, construction sequence and project budget also influence the final decision. A detailed geotechnical investigation and structural analysis are essential before selecting the retaining system.
Modern Equipment for Diaphragm Wall Construction
Jalmala Boring Works operates modern SANY hydraulic piling and diaphragm wall rigs for relevant deep foundation construction activities. The company brings a third-generation family-owned business background dating back to 1962. Equipment coordination, site preparation, construction planning and execution procedures are considered according to project specifications and site conditions.
Deep Basement Retaining Wall Contractor in India
Based in Sarkhej, Ahmedabad, Gujarat, Jalmala Boring Works considers specialised piling and diaphragm wall construction projects across India. Builders, developers, engineering consultants and infrastructure contractors can contact the company to discuss deep basement excavation, retaining wall construction and foundation requirements. Sharing structural drawings, soil investigation reports and site details helps establish the proposed construction scope.
If you are searching for which retaining system is suitable for deep basement, diaphragm walls, secant pile walls and contiguous pile walls are potential solutions depending on engineering requirements. Jalmala Boring Works provides specialised diaphragm wall and piling construction capabilities for relevant foundation projects. Contact the team to discuss your basement construction requirements.
Deep Basement Retaining System – Related Search Terms
Frequently Asked Questions
Which retaining system is suitable for deep basement construction?
Diaphragm walls, secant pile walls and contiguous pile walls are commonly considered for deep basement excavation. The appropriate system depends on excavation depth, soil conditions, groundwater levels, nearby buildings and structural design.
Why are diaphragm walls suitable for deep basements?
Diaphragm walls provide structural earth retention and can help control groundwater ingress when properly designed and constructed. They are often considered for deep basements and underground structures in congested urban locations.
What is the difference between diaphragm walls and secant pile walls?
Diaphragm walls are generally constructed as reinforced concrete panels using specialised trench excavation methods. Secant pile walls consist of overlapping primary and secondary piles. Both systems can provide excavation support, but their suitability depends on project conditions.
Can ground anchors be used for deep basement excavation?
Yes. Ground anchors may provide additional lateral support to diaphragm walls and pile retaining systems. Their use depends on geotechnical conditions, structural design, site boundaries and underground utility restrictions.
How does groundwater affect basement retaining system selection?
Groundwater levels and permeability influence the required retaining wall system, seepage control measures and construction methodology. A suitable system must be evaluated using geotechnical investigation and groundwater assessment.
Does Jalmala Boring Works provide diaphragm wall construction in India?
Jalmala Boring Works specialises in diaphragm wall and pile foundation construction. Based in Ahmedabad, Gujarat, the company considers projects across India subject to project scope, technical requirements and equipment mobilisation.
Contact Jalmala Boring Works
Discuss Your Deep Basement Retaining Wall Project
Contact our team to discuss diaphragm wall construction, pile retaining systems and specialised deep basement excavation requirements for your project.
Jalmala Boring Works
Dholka Road, near Nariampura Village, Sarkhej, Ahmedabad, Gujarat 382210, India
Phone: +91 93745 45415
Email: jalmala.pile@gmail.com
