
Anchor Piles
Ground Anchoring & Excavation Support Specialists
Jalmala Boring Works provides permanent and temporary ground anchor systems for diaphragm wall support, retaining walls, deep excavations, basements, and slope stabilization. Our high-capacity anchor piles are drilled, grouted, tested, and stressed to transfer lateral loads into stable ground, ensuring maximum structural stability, minimal wall movement, and safe excavation for commercial, industrial, infrastructure, and metro projects.
Ground Anchor(Tieback) Construction Process
A detailed step-by-step guide of how Jalmala Boring Works installs high-capacity Ground Anchors / Tieback Anchors for deep excavation support.







Survey, Setting Out & Anchor Positioning
Survey, marking, and positioning of anchors with precise inclination and coordinates.
- Survey and mark anchor locations as per approved drawings
- Determine anchor inclination, spacing, depth, and capacity
- Set up Hydraulic Anchor Drilling Rig
- Verify wall levels and drilling coordinates
- Ensure safe working platform and access

Anchor Hole Drilling
Drilling of inclined boreholes using hydraulic anchor rig.
- Drill inclined boreholes through diaphragm wall or retaining structure
- Use Hydraulic Anchor Rig with rotary/percussion system
- Drill to required length and stable strata
- Monitor drilling angle, depth, and diameter
- Clean boreholes using compressed air or water flushing

Anchor Tendon Installation
Insertion of prestressed strands or bars with corrosion protection.
- Insert prestressed steel strands or threaded anchor bars
- Install centralizers, sheathing, and corrosion protection
- Ensure proper free length and bonded length
- Accurate positioning within the borehole
- Pre-grouting inspection and approval

Grouting Operations
High-pressure grouting to bond the anchor tendon with surrounding ground.
- Inject cement grout or chemical from bottom to top
- Create strong bond between tendon and soil/rock
- Fill all voids and ensure complete encapsulation
- Maintain specified grout pressure and quality
- Allow grout to achieve required strength

Anchor Stressing & Lock-Off
Stressing of anchors to design load and lock-off.
- Install anchor heads, bearing plates, and wedges
- Test anchors using hydraulic jacks
- Stress anchors to the required design load
- Lock-off at approved working load
- Record elongation and test results

Quality Control & Excavation Support
Testing, monitoring, and long-term performance verification.
- Verify performance through proof and lift-off tests
- Monitor wall movement and anchor loads
- Install additional levels as excavation progresses
- Complete testing records and documentation
- Provide continuous lateral support to deep excavations
Recent Projects
Diaphragm Wall & Deep Foundation Specialists
Diaphragm Wall Anchors in Gujarat for Deep Excavation Projects
Deep excavation projects require carefully designed retaining systems to manage lateral earth pressure, groundwater and surrounding ground movement. Diaphragm walls are widely used in projects where a strong underground retaining structure is required. Depending on excavation depth and structural design, ground anchors can be incorporated to provide additional support to these walls.
An anchored diaphragm wall combines a reinforced concrete retaining wall with engineered ground anchors. This arrangement can provide lateral resistance while keeping the excavation area relatively clear of internal bracing, where the design and site constraints permit.
Jalmala Boring Works is a third-generation, family-owned foundation company established in 1962. With over 60 years of practical industry experience, the company works in specialist foundation construction and diaphragm wall-related projects. Based in Ahmedabad, Gujarat, the company has project experience across more than 20 Indian states.
Understanding Diaphragm Walls
A diaphragm wall is a reinforced concrete underground wall constructed in panels. During excavation, a suitable supporting fluid is generally used to maintain trench stability until reinforcement and concrete placement are completed according to the construction method.
Diaphragm walls are commonly considered for deep basements, underground structures, metro developments, retaining applications and projects in congested urban locations. Their design depends on wall depth, thickness, soil profile, groundwater conditions and the loads acting around the excavation.
A diaphragm wall can function as a retaining structure independently in some designs or be supported by additional systems such as ground anchors, struts or other engineered supports.
Role of Ground Anchors in Diaphragm Wall Construction
During staged excavation, a diaphragm wall is exposed to changing earth pressure and groundwater conditions. In suitable projects, ground anchors can be installed through or connected to the wall to provide additional lateral support.
A typical grouted ground anchor includes a steel tendon, an unbonded free length, a bonded anchorage length and an anchor head. The bonded section transfers the designed tensile load into suitable ground, while the anchor head transfers the force to the diaphragm wall.
Depending on the design, anchors may be installed in one or more rows as excavation progresses. The number of rows, inclination, spacing, length and stressing requirements must be determined through project-specific engineering calculations.
Applications of Anchored Diaphragm Walls
Anchored diaphragm wall systems may be considered for construction projects that require deep retaining structures and additional lateral support.
Deep Basement Construction
Suitable retaining arrangements for multi-level basements, underground parking and commercial developments.
Metro and Underground Stations
Deep excavation support requirements for underground transport infrastructure and station construction.
Commercial Complexes
Retaining systems for developments where underground floors and limited construction space require careful planning.
Industrial Facilities
Underground structures, deep pits and industrial developments requiring engineered retaining arrangements.
Tunnel Approaches
Diaphragm wall systems may be considered for selected tunnel approaches and underground infrastructure works.
Waterfront and Below-Ground Structures
Retaining arrangements for selected projects where groundwater and surrounding soil conditions influence excavation design.
Important Stages in an Anchored Diaphragm Wall Project
An anchored diaphragm wall project requires coordination between geotechnical design, wall construction, excavation stages and anchor installation. The sequence varies according to the approved project methodology.
1. Site Investigation and Engineering Design
Ground investigation, groundwater assessment, excavation geometry and surrounding structures are evaluated before finalising the retaining and anchoring design.
2. Diaphragm Wall Construction
Wall panels are constructed using the specified excavation, support-fluid, reinforcement and concreting procedures.
3. Staged Excavation
Excavation proceeds according to the approved construction sequence, with monitoring and support installation at the specified stages.
4. Ground Anchor Installation
Where included in the design, anchors are installed at the specified positions, inclinations and lengths, with suitable bond and free-length arrangements.
5. Anchor Testing and Stressing
Specified anchor testing and stressing procedures are carried out to verify performance and establish the required load transfer.
6. Monitoring and Quality Control
Wall movement, ground behaviour and construction records are monitored according to project specifications and engineering requirements.
Engineering Considerations for Diaphragm Wall Anchors
The performance of an anchored diaphragm wall depends on the complete wall-and-anchor system. Engineers generally consider the following factors during project planning:
Ground Conditions
Soil layers, rock strength, groundwater and the available anchorage zone affect anchor feasibility and design.
Wall Movement
Wall stiffness, excavation stages and anchor loading influence lateral displacement and overall system behaviour.
Anchor Capacity
Tendon properties, free length, bonded length, spacing and design loads require engineering assessment.
Groundwater Control
Water pressure, seepage and dewatering requirements must be evaluated as part of the excavation design.
Nearby Structures
Adjacent buildings, underground utilities and property boundaries can affect the position and feasibility of anchors.
Testing and Monitoring
Anchor load tests, wall movement monitoring and quality records help assess construction performance.
Diaphragm Wall Contractor in Ahmedabad and Gujarat
Ahmedabad and other growing regions of Gujarat have construction requirements across commercial, residential, industrial and infrastructure sectors. Projects involving deep basements and underground structures may require diaphragm walls and carefully designed excavation support systems.
Jalmala Boring Works is based in Ahmedabad, Gujarat, and has experience in foundation-related projects across more than 20 Indian states. The company operates modern SANY hydraulic piling and diaphragm wall rigs and follows ISO 9001:2015 certified processes.
Explore related foundation and ground engineering services:
Why Choose Jalmala Boring Works?
Specialist foundation construction requires practical experience, appropriate equipment, careful planning and coordination with project engineers. Jalmala Boring Works has developed its industry knowledge through three generations of family involvement.
- Established in 1962 with over 60 years of experience.
- Third-generation family-owned foundation company.
- ISO 9001:2015 certified processes.
- Modern SANY hydraulic piling and diaphragm wall rigs.
- Project experience across more than 20 Indian states.
- Focus on construction quality and project coordination.
Frequently Asked Questions
1. What are diaphragm wall anchors?
Diaphragm wall anchors are ground-support elements connected to a diaphragm wall to provide additional resistance against lateral forces. They are commonly designed as ground anchors or tiebacks where site conditions permit.
2. Why are anchors used with diaphragm walls?
Anchors can provide lateral support to diaphragm walls during deep excavation. They may help control wall movement and transfer loads into suitable ground beyond the excavation's potential failure zone.
3. Where are anchored diaphragm walls used?
They may be considered for deep basements, underground parking facilities, metro infrastructure, commercial developments, industrial projects and other deep excavation works.
4. What is the difference between a diaphragm wall and a ground anchor?
A diaphragm wall is a reinforced concrete retaining structure constructed in the ground. A ground anchor is a separate tension-resisting element that may be connected to the wall to provide additional lateral support.
5. Can every diaphragm wall use ground anchors?
No. Anchor suitability depends on soil and rock conditions, groundwater, excavation geometry, nearby properties, underground utilities and structural design requirements.
6. Does Jalmala Boring Works operate across Gujarat?
Jalmala Boring Works is based in Ahmedabad, Gujarat, and has experience in projects across more than 20 Indian states. Contact the team to discuss your diaphragm wall and foundation project.
Discuss Your Diaphragm Wall Project
Planning a deep basement, underground structure or diaphragm wall project? Contact Jalmala Boring Works to discuss your location, drawings, project specifications and foundation requirements.
